0
I have a .pdf of the manual from the following link, it explains how to install the motor.
http://www.managemyhome.com/mmh/owner_manuals/search?sid=MMHMxSearsx00019&query=113241691+CRAFTSMAN
Good luck,
I need a blade guard assembly for mine if you have a source for me.
pcbn2u@bellsouth.net
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where to install cable chains on 2000 olds bravada?
Rear wheels if it is four wheel drive or rear wheel drive.
How do you install a LAN driver to windows ME without a CD?
You could use: * a floppy * a USB Flash drive * a null modem cable * a LapLink cable * an external hard drive * a DVD
What happens when you install a floppy drive cable backwards?
The floppy drive data cable has a stripe denoting pin #1...PIN #1 on the FDD cable must be aligned with PIN #1 on the drive connector, or the drive will not work...This misalignment does not damage the drive, but the activity light will stay on constantly...To correct this, turn the computer off, reconnect the data cable aligning the pins correctly & reboot the computer....
Which gives the proper sequence for installing master and slave id drives?
Mount the drives in the carrier connect the 40-pin cable to the drives set the drive at the end of the cable to master set the drive in the middle of the cable to slave install the drives in the computer and configure the drives
How can one install a combo drive?
This computer technology works on 'master and slave' technology. in this two similar type of devices can be attached to the same data port on the motherboard. In order to install a combo drive there are two possible conditions:-1. you already have a CD-ROM,CD-rw etc.2. this is your first drive. if you already have drive then plug the data cable of combo drive into the previous drive and then plug the power cable of combo drive drive into power supply of system . then turn on the system combo drive will appear as the slave of previous drive . The combo drive is ready to use. (In case of an OS other than win- xp, you are supposed to install a driver). If this is your first drive then plug the data cable of combo drive on the motherboard and plug the power supply and turn on the system drive will appear (in case of OS other than win- xp, you are supposed to insall a driver).
Is the Quantum Tape Ultrium Drive hard to instal?
Yes, the Quantum Tape Ultrium Drive is very easy to install. You just connect the drive to your computer using a 68-pin Ultra160 SCSI cable.
How do you install a new hard drive?
Attach a cable for the data (IDE or SATA types) between the drive and a socket n the motherboard. Attach a cable for the power (there are always spare cables for this coming from the PSU (Power Supply Unit). Attach between two and four screws at the sides of the drive to hold it in place in the drive bay.
Do you install tire cable for Mercedes c300 front tires or rear tires?
It is a Rear Wheel Drive so tire chains go on the rear.
Where do you install an internal drive in a computer?
The answer varies depending on what you are trying to install. If you are looking to install a hard drive it can be mounted anywhere inside the machine, as long as the appropriate cable is connected to it. Be very careful when modifying a computer on your own, there are several things that may occur that will render the computer useless. Consider contacting someone with formal training.
How hard is it to install an internal hard drive on a computer and what parts do you need in addition to the actual hard drive?
very easy, if its SATA you will need a sata data cable, and sata power cable(usually included with the power supply) also you might need a caddy (the thing the hard drive sits in) but there will probably be spares inside your computer. The most common thing you wont have is a SATA cable
In the periodic table what is the drive?
there is no such thing as drive on the periodic table
What is a floppy drive data cable?
a cable for connecting a floppy drive to the computer motherboard.
