on a 1996 m.m. you open the trunk ...take the interior lining that is blocking the back of the lights off.....remove a few screws....push out and youll se that theres two clips on the outside ,unclip done!....now on the trunk there are four nuts to remove , and presto done.....please keep in mind that the lights have wires to disconnect..mess em up and your in trouble
Yes unfortunatly
You can change the tail light for a 95 to 02 by changing the trunk LID by changing the lid it allows the light to fit.
How do you open the tail light onTake it to a garage you tight git
Fuse panel.
1994-2005 models: (1)remove the light assembly screws (lower the tailgate for access); (2)take the assembly out of the fender for access to the tail light bulbs. To remove the bulbs:(1)rotate the bulb socket to align the lugs and take the socket out of the housing; (2)carefully pry off the retaining clip and pull the bulb out of the socket; (3)installation is the reverse of removal. - Mazda Pickups Reapair Manual
The tail light covers (the painted bezels) are only held on by 3m Automotive, double-sided tape.
look for screws in the lens to take out.
there is a plastic cover above the tail light held on by two screws. remove that and simply pull the tail light out.
As long as its the FC3S model it will fit.
To remove the tail light assembly on a 1997 Mazda Protege remove the two screws that are usually covered by the trunk. After that use some force and push on the inner part of the tail light toward the side of the car. There is a clip in the side of the car that requires some force to undo. Make sure you push in the outward direction to either the driver side on the driver side tail light or the passenger side for the passenger side tail light. After that is removed the tail light should be hanging by wires ready for bulb changes. To change the bulbs just twisth the plastic part.
to change f250 tail lights lower tailgate on side of bed where tail gate sits when closed there are a couple of screws at tail light level remove these screws tail light will then come out of truck body bulbs are at back side of tail light assembly and can now be changed replacement is exact opposite of removal
You may want to go to the Toyota Authorized Workshop to Get the Tail Light Clip Removal Tool form this workshop. Hope this somehow answer your question, or go to the Toyota Parts and Service Center and ask for one. Cheers!! : )