yes take it to a well known parts store like advance auto parts they use a a small hand held computer to reset the warning light
your knock sensor could need to be replaced
Warning lights are the vehicle's warning indicators. When a warning light is lit up, it means that something is wrong and in need of immediate attention.
They are normally used for security markers or ultraviolet warning sensors. They can easily be mixed with base paint and used indoors for your own personal use.
Check the temperature sender. not the sensor, the sender. the sender goes from the thermostat to the computer. They have been know to prevent vehicles from running. I second that.
warning lights mean something is wrong and needs attention by a mechanic
If you have made the correct repairs, a short drive will clear the light.
If you replaced the sensors and the light is still on, then you have a wiring issue. You will need to check the wires going to the sensors.
just peplace front brake pad and new sensors on my s550 mercede but the sensor light is still on how do i get it to go off
remove the sensors and clean it. then put it back. if the warning light is still replace the sensors it is cheap
It depends on why the light is illuminated. The only way to find out is with a scan tool.
A tsunami warning machine depends on information that comes from a network of sensors. These sensors indicate when an earthquake happens, and geologists decide if a tsunami is likely. If so, they send out a warning. If the wave sensors pick up actual tsunami activity, the tsunami warning machine is activated in each of the areas that is at risk.
An illuminated car symbol on the dashboard of a Peugeot 307 is the open door warning. Indication that one or more doors are not closed properly.
If it is a red circle with serrated "parenthesis" to the right and to the Left, then it's your brake warning light. The brake sensors are telling you there is something wrong with the brake system, IE: pads, fluid, sensors, etc.
The vehicle does not monitor the amount of brake life you have left nor does the red BRAKE warning light indicate that pads and rotor need replacement. The red BRAKE warning indicator is meant to warn you when there is a dangerous hydraulic problem with your braking system. Take the vehicle to a professional, who know how to service an automotive braking system. On a vehicle with brake pad wear sensors, if the sensors are new, then you have a broken wire.
It is possible that the Idle Air Control ( IAC ) valve may need to be replaced. That's a guess on my part and should be taken into consideration with any warning lights that may be illuminated on the instrument cluster.
Depending on which warning light(s) is illuminated on your dash, they represent the 3 amigos.Each amigo adds barney to any individual vehicular function.
turn the key to position two and have the drivers door open for about 40 seconds, the light should automatically go off.. good luck.