locate the the radiator, follow the top hose until you see the thermose stat housing where you remove two bolts and it should pop off
inside the radiator hose
You will find the ICM directly below the coils. Just remove the coils and you will be able to remove it. This is on a 1990 Buick Century V6 3300 engine. If you have a different engine I cannot confirm the location.
how much torque does 1990 Buick century 3.3 have
locate the top hose on the radiator drive side follow it back to thermostat housing it's were the clamp is at on the end of the hose.
The 1990 Buick Century has a timing chain and not a belt. No replacement is necessary.
yea it should
code 26 buick 1990 lasabre limited
Fuse box on 1990 Buick Centur is in dshboard by glove compartment
Try it, if it doesn't work then all you have to do is go to Walmart and get an adapter for it.
follow the radaitor hose from the top right side it goes directly to the thermostat housing remove the bolt then there is your thermostat
For a 1990 Buick Century V6 3.3L engine, the manufacturer's recommended spark plug gap is .060" (1.52mm)
take it to the mechanic