The power of light bulbs is measured in
pf 69 is higher in value, than pf65.
pi=pf
to capacitate and correct
800000000 lbs or your mother
refractive index is something that measures the speed of light as it goes through an object is the ratio between real depth(the distance from the object to the surface of the medium) and apparent depth(the distance from the virtual image pf the object to the surface of the medium) dazani ch? siri bxo zurnay leda!
Pf is the symbol for Power Factor.
PF = Power Forward.
The ratio of active power (real power) and apparent power is called power factor ( pf ). Power Factor ( pf ) = Active Power / Apparent Power = .................. ( kvar )
Measure the voltage, current and power. The PF is power/(volts x amps).
Capacitors are used to improve an inductive load's power factor towards unity. The power factor before and after adding the capacitor bank depends entirely on the inductive/capacitive values involved.
The current [I] (measured in Amps) is equal to the power [P] (measured in Watts) divided by the voltage [V] (in Volts). I = P/V Amps = Watts / Volts Therefore, P*V=I Watts * Volts = Amps
Power Foward
In basketball stats, PF means "Personal Foul". PF also means "Power Forward", a position on a basketball team.If you are looking at NBA standings, PF means "Points For", or how many points a team is averaging, and PA means "Points Against", or how many points they are allowing.
KVA is the vector sum of real and reactive power; put differently, KVA at a specified power factor will tell you how many KW you have: KW = KVA * pf You must provide a power factor or power factor angle (if angle, replace pf with cos (pf) in above equation) or total reactive power to calculate.
when lagging Power Factor changes to leading PF, then the voltage across the circuit in which capacitor bank is connected, is increased.
Induction motor by design is inductive load. Hence the PF tends to be lower
In a basketball stat line PF stands for Personal Fouls.