0
What else can I help you with?
Why do some ATV's have resistors in the plug cap Can it be bypassed?
The resistor in question is put into the plug wire connector of atv's, motorcycles and many automobiles. The resistance is usually about 5000 ohms. The reason for it is to increase the amperage to the spark plug, giving the plug a hotter spark. Removing the resistor will cause hard starting, engine misfire, and in some engines no start at all. It is not an expensive part and can be found at almost any motorcycle shop. Hope this will be of some help Don
Where is spark plug on a Honda ATV 500 rubicon?
On a Honda ATV 500 Rubicon, the spark plug is typically located on the side of the engine, beneath a protective cover. To access it, you may need to remove the seat and any necessary panels. The spark plug can be identified by its wire connection and is usually secured with a metal cap. Always consult the owner's manual for specific instructions on accessing and servicing the spark plug.
What is the spark plug cap for a 1993 Chevy blazer?
There is no spark plug cap located on the 1993 Chevy Blazer. The spark plug gap for this vehicle varies depending on the type of spark plug that is used. The OEM spark plug gap for this year is 0.040.
What are the order spark plug wires?
1993 Ford Escort 1.9 Liter Engine Spark Plug to Distributor Cap Wire Order: Looking at the engine from the front of the car, the distributor cap is to the right of the engine (or on the driver's side of the car looking from the front of the car. The spark plug wires come from each spark plug and terminate on the distributor cap. They plug in to the distributor cap. Looking at the engine from the front of the car, the spark plugs (left to right) are identified as spark plug "A", spark plug "B", spark plug "C" and spark plug "D". "A" wire comes from the "A" spark plug to the 4th (right most) hole on the distributor cap; "B" wire comes from the "B" spark plug to the 3rd (2nd right most) hole on the distributor cap; "C" wire comes from the "C" spark plug to the 2nd (left most) hole on the distributor cap and the "D" wire comes from the "D" spark plug to the left most hole on the distributor cap.
How do you take out a spark plug?
You take off the cap. Then pull out the spark plug. Put a new spark plug in. Then put the cap back on. Voila your done. Easy as pie!
What causes a rotor button to burn up frequently?
To much resistance in the spark plug wires. Start fresh with a new distributor cap, rotor and spark plug wires. Also be sure you have the correct spark plugs installed.
Why theres not a spark at spark plug on ktm 250?
bad plug bad plug cap stator
What is a distrubutor cap?
A Distributor cap is the device that the spark plug wires are connected to. It distributes spark from the ignition coil through the wires to each spark plug.
Why is it there is no spark in the spark plug leads?
If you know that there is spark at the distributor cap then I would think it would be bad spark plug leads.
Where is the distributor cap on a GMC sierra?
Follow the spark plug wires from the spark plugs. If it has a distributor cap, they will plug into it. It may not have one and have oil packs.
What order are the spark plug wires on Oldsmobile 307 distributor cap?
no comment i just need the answer where is the number one spark plug on the 307 distributor cap
Where is the spark plug at on a 1997 Honda 250?
Depends on what we are talking about. There is the Honda Recon 250 ATV with a single cylindar engine, the spark plug is located at the cylinder head. The Honda Hornet motorcycle is a 4 cylindar bike with the spark plugs at the side of the cylinder heads. Then there is the single cylindar Honda Nighthawk 250 one cylindar motorcycle with the spark plug located at the side of the cylinder hear. The spark plug is easily located on any vehicle as it is visible by a thick wire and a (usually) rubber spark plug cap.
