0
The turn signals on your 2003 Chevy Malibu do not work most of time but work sometimes Is there a problem with the switch Or the relay?
Ddwatson
I have a 2003 Malibu and have the same issue. The problem is the module that houses the turn signals and hazard lights. This is a frequent issue with Malibu's but fairly easy to fix.
Remove dash around the hazard button. Remove the connector from behind there and use a flat-head screwdriver to disconnect it. Use a replacement part from any auto parts store.
It takes about ten minutes to do if you know what you're doing. Don't go through the dealer to get it done. They quoted $175 where you can do it yourself for $10.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Turn signals do not work sometimes?
Well I personally have a 2000 Malibu LS and have had the same troubles random clicking noises when signals aren't on then no signals or random signals. The problem is your hazard relay switch, it is located in your dash board very easy abd cheap fix.
Why does the ac switch blinks on and off when ac is on a 1999 chevt Malibu?
The common fix for this problem is dirty control swithc on the environment console. I toolk mine apart and cleaned it to fix this same problem in my Malibu
Why are tail lights out on 1999 Chevrolet Malibu is it the under the pedal that's the problem?
Depends on what exactly is going on. That era Malibu had a hazard lamp switch that would commonly fail. This would cause the turn signals to no longer flash. Also, multi-function switch failures are common. The brake lamps go through this switch and if the switch fails, sometimes the brake lamps won't light. Another possibility (if it's brake lamps only) is the brake pedal switch. This switch tends to build resistance from carbon tracking due to arcing.If you really are talking about the taillights (the less-bright lamps that come on with the headlamps), you could have a bad fuse, bad bulbs, bad headlamp switch or any combination of the above.
What makes the signals sometimes not work on a 2002 impala?
possible bad turn signal switch in the steering column or a bad ground on your turn signals.
How do you get to the flasher on a 2004 Chevrolet Malibu?
The flasher is actually the hazard switch itself. If removed turn signals will not function. Just pop the old switch out and unplug it to replace if broken (if present and signal don't work).
The blinkers are stuck on my 95 avenger your brights wont come on either can you tell you what the problem may be?
Check the Multi switch. This is the turn signal on the side of your steering wheel. This is sometimes called a multi switch because it runs the signals, headlight dimmer, sometimes cruise control and windshield wipers. Easy to replace.
98 Chevy Malibu the ignition wont turn off all the way is there a cheap way of fixing it?
No i have a 2002 malibu that had the same problem when i checked it was the park lock switch that was causing it
How do you program a new switch in Chevy Malibu 2001?
1998 chevy malibu programe new switch
How do you replace the ignition switch on 1999 Malibu?
please give instructions on replacing the ignition switch on my 99 Malibu
Chevy Malibu fuel shut off switch?
04 Malibu fuel shut off switch location
How do you change the neutral safety switch on a 2003 Chevy Malibu?
how do you check the safety neutral switch on a 2003 Chevy Malibu
The turn signals and hazards lights do not work how do you fix this problem?
Could be the bulbs or the fuses or the flashers or the signal switch assembly
