There could be several causes for this, but only two come to my mind at the moment.
appears no fire going to spark plugs
try replacing the spark plugs
Check the ballist resister on fire wall !!!!
It should try to start at least. It may or may not actually start but you should hear it fire on the 2 good plugs. Why not just replace all 4 spark plugs?
check the spark plugs. may not be catching fire.
You will still have spark, car will try to start or backfire. If no spark at all the plugs see if you have GOOD spark from coil. If coil is working then you will find the problem in between the coil and the plugs, probably a distributor component issue. The ballast resister is a possible cause also.
im not getting fire to the spark plugs but the distributor is getting fire what do i do please help
if it is getting fuel and spark it could be the map sensor
Check and clean your spark plugs that might be the problem.
Miss fire on any car is usually ignition related. Checking the spark plugs & wires is a good start.
Old spark plugs can make a car misfire, run rough, and not fire at all.
your distrubator is numbered and your plugs if you start at the front of your engine toward the radiator the plugs are 2,4,6 and on the fire wall side the plugs are 1,3,5