This cannot be done very accurately. However, take enough sheets to make a stack sufficiently high to correspond with the length of the metre rule. Divide the number of sheets by a metre. That will give you the fraction of a metre that one sheet makes.
Depends on what paper you're talking about. The average sheet of 20lb copier paper is 0.0038 inches thick; whereas the average sheet of cardstock is 0.0175 inches thick. For a great resource of various thicknesses visit http://iconix.biz/info/paper-weights.htm
An instrument called micrometer is used to measure paper or card thickness.
A ream (500 sheets) of 20 lb office paper is just under 2 inches thick, so one sheet cannot be 0.001 (one-thousandth of an inch). It's closer to 0.004 inches (more like 0.0038). At 25.4 mm per inch, this gives us about 0.09652 mm, or just under one-tenth of a millimeter thick.
20 lb. bond paper isn't 20 pounds of bond paper, but rather the basis weight, which measures the density of the paper based on how heavy 500 sheets of that paper is. A single sheet of this type of paper is, on average, 4/1000 of an inch thick.
about 25cm
Thickness is about 25cm.
Thickness of a sheet of paper would not be measured in feet, but possibly in inches. An average sheet of typing paper is about 1/200 of an inch.
9cmvmd
Measure the thickness of multiple sheets (Say, ten or twenty) then divide the answer by the number of sheets to get the thickness of a single sheet.
Provided the size of the tracing-paper sheet fits the paper tray of a printer, there should be no problem in printing on tracing paper. Printers (inkjet, laser) usually print on A4 copier paper, or clear acrylic film (for presentation by projection during a lecture). Provided the tracing paper is not too flimsy and too thin to be gripped by rollers on passing through the printer, it should be possible to print on tracing paper.
Calculate the thickness of a sheet of notebook paper in mircrome
Folding the piece of paper does not change the thickness of the piece of paper. However, the thickness of the folded paper would be twice that of the original sheet of paper.
stack up 100 of the same type of piece of paper, measure the thickness with a very accurate ruler, divide this thickness by 100
One with length and breadth, but no thickness. You could it out of a sheet of paper.
3 Dimensions: Length, Width & Thickness
deceptive mesurment