That's like having a series combination of 4 + 4 ohms, in parallel with another resistance of 4 ohms. Calculate the series resistance, then use the parallel formula to combine it with the third resistance.
to determine the total resistance, you add them vectorilly,first find the inductive reactance of the inductor by the following formula: 2 pi F L (2x3.14 x frequency in herts x inductance in henrys) next, consider the inductive reactance and the resistance as the two sides of a right triangle and the hippotanus would be the total impedance.(this combined ''resistance'' is called impedance.) to determine the total resistance, you add them vectorilly,first find the inductive reactance of the inductor by the following formula: 2 pi F L (2x3.14 x frequency in herts x inductance in henrys) next, consider the inductive reactance and the resistance as the two sides of a right triangle and the hippotanus would be the total impedance.(this combined ''resistance'' is called impedance.)
Most definitely not, as resistance, reactance, and impedance are not themselves phasor quantities. However, it is derived from a phasor diagram (by dividing a voltage phasor diagram by the reference phasor, current).
Since inductive reactance is 90° out of phase from pure resistance, this can be calculated like the hypotenuse of a right triangle. Sqrt( 172 + 62) = 18.028 Ω The angle is 70.6° lagging.
The voltage is gained by multiplying the current and resistance together, i.e.. 50 x 500 = 25000 Imagine the three as a triangle with the voltage at the top, and the current and resistance at the bottom- V . ---- . I x R The voltage divided by the current is the resistance and the voltage divided by the resistance is the current. Therefore the current times the resistance is equal to the voltage. Having any two of these figures allows you to find the third.
This triangle is called a scalene triangle.
interior is the inside of a triangle but is connected to the triangle.
An impedance triangle has resistance (always positive) in the x axis and reactance (at a right angle to resistance) in the y axis. The line that completes this triangle (the hypotenuse) is the absolute value of the impedance.
2 ohms. It is like connecting two 3 ohm resistors in series and then these two series resistors are connected in parallel with third 3 ohm resistor in parallel
Any two vertices of a triangle are connected by a side.
The shape is triangle
It's called the "hypotenuse" of the right triangle.
A triangle is 3 lines or sides connected together at their ends. These lines are not always the same lengths.
There are no 'diagonals' in a triangle. Each vertex is connected to both of the other vertices, by the sides.
There is no such thing as a i triangle
a triangle does not equal just a number. a triangle is an object that has three edges all connected at there tips. the triangle's inside angles all add up to 180 degrees. a triangle can be acute, obtuse, or right.
how about 2 hexagons connected with 6 rectangles
it is a heat resistance, used for heating purposes, and it is where the clay triangle be placed.