Are you asking if the Catera HAS one, or are you asking WHERE it is? If you want to know whether or not it has one, simply look under the hood for the throttle cable. If there is no throttle cable coming from the firewall below the brake fluid reservoir to the front of the intake manifold, than it is an electrical throttle system; NOT a mechanical throttle (mechanical throttles have the throttle cable). If you already knew that but you're just wondering where the throttle actuator motor is, it is located on the side of the throttle body. It's going to be on the same side of the throttle with the MAF sensor located on the air intake. Hopefully this will help out, I actually just spent a week rebuilding the electrical throttle system on my 2005 Mustang GT. Despite the difference in vehicles compared to yours, all electric throttle systems are very similar. If you plan on working on your throttle system, THERE ARE A LOT, and I MEAN A LOT, of things you need to be sure you take into consideration BEFORE you disassemble any part of the throttle system. If you have any more questions, feel free to respond anytime. Oh Yeah - Failing to take into consideration the sensitivity and procedures needed to be taken while repairing/working on an electrical throttle system will result in AT LEAST 1 check engine light code, as well as not being able to drive your car whatsoever. Improper steps while servicing the system will more than likely result in virtually NO throttle response, well at least not enough to make your car move. Please be careful while doing anything with such a system until you know EXACTLY what you're doing. Not to act like a jerk of anything, but I just don't want you to suffer what I had to these last few days........GOOD LUCK!
The code P1516 goes to Throttle Actuator Control (TAC) Module or Throttle Actuator Position Performance
Trouble code P2100 means: Throttle actuator control (TAC) motor-open circuit Trouble code P2119 means: Throttle actuator control throttle body range/performance
reset Throttle Control Actuator of Nissan / my scanner g-scan and diagun i can reset with this tools or no
Trouble code P2101 means: Throttle actuator control (TAC) motor-range/performance
Trouble code P2107 means: Throttle Actuator Control Module Processor Trouble code P2110 means: Throttle Actuator Control Motor Processor also means: throttle position sensor
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode Trouble code P2112 means: Throttle actuator control (TAC) system actuator stuck closed
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
Stepper idle speed actuator in carbureted vehicles it is used to control the engine's idling RPM. It also regulates the position of the throttle valve plate.
It is just next to the TPS (Throttle Position Sensor) on the intake manifold.
Electronic Throttle Control Actuator http://www.infinitihelp.com/Ownership/Common/codes3.htm
Idle Speed/Throttle Actuator - ElectronicFront RH Side Of Engine
Trouble code P2106 means: Throttle actuator control (TAC) system-forced limited power mode