how do you put a Plymouth neon back in time 2.0L single overhead cam
The timing marks can be found on the front main pulley and on the flywheel. The timing marks will be scattered around the outside of the pulley and the flywheel.
Generally, for most single cam engines, there is a dot or mark on the cam sprocket and a similar mark on the crank sprocket. Point them at each other. the timing marks on the crank and cam sprockets must be lined up with marks on the timing chain in an overhead cam engine
the timing marks on the cam sprockets need to lined up. I would not attempt this repair if you don't know what you're doing. If the timing is off and you rotate the engine, you can cause severe damage to your valves.
the timing marks are on the cam and crank gears in the timing case.
If all the timing marks are lined up it should be TDC compression.
the timing marks are on the back of your cam sprockets.
The cam gear timing marks for a Isuzu 320 V6 are located on the cam sprocket and the timing chain itself. The marks must be aligned with each other to ensure proper initial timing.
Nissan timing marks g15 engin
The timing marks for the cam sprocket on a 98 S10 is on the front. The marks for the crank shaft is on the oil pump gear.
yes
The timing marks are on the timing cover for the crank pulley, and on the cyl head for the cam ...