The oil pressure sensor screws in next to the oil filter on the front of the engine on a 1999 Chrysler Town and Country.
A 1997 Chrysler Town and Country does not have a governor pressure sensor.
A 2002 Chrysler Town and Country does not use a mass airflow sensor.
A 2006 Chrysler Town and Country does not have a mass airflow sensor.
The Refrigerant Pressure Sensor / Switch will be located just to the left of the alternator pulley on the firewall....
The oil pressure sensor is under the intake manifold on a 3.6L.
The oil pressure sensor is on the front of the engine, near the oil filter.
The fuel level sensor is in the tank.
because it is
The cam sensor on a 2005 Chrysler Town and Country is on the passenger side top of the engine next to where the motor mount bracket attaches.
A 1996 Chrysler Town and Country has two oxygen sensors. They are screwed into the exhaust on the rear of the engine.
Tire pressure sensor in mounted inside the tire at the valve stem. The valve stem is part of the sensor.
Left lower on engine block.
The oil pressure sensor is on the front of the engine, just to the side of the oil filter.
a 2003 Chrysler Town and Country does not have a mass airflow sensor.
The input and output speed sensors are located on the front of the trans. They have two wires and the input sensor is closer to the engine.
A 1997 Chrysler does not have a MAF sensor.A 1997 Chrysler does not have a MAF sensor.
It is called an oil pressure sensor socket.
On the catalytic converter
There are two in the exhaust pipe behind the engine.
It screws into the top of the rear exhaust manifold.
On My 2001 Chrysler T & C it is located on top center in the back of the engine
Check the oi pressure sensor, located next to the filter, for oil in the electrical plug. If oil is present, replace sensor.
It. is on the throttle body, opposite of where the cables attach.
It is on the front of the transmission, between the cooler hoses.