Want this question answered?
eagles do not have water pumps on their talons dude
30 ft. lbs.
The 2002 Dodge Durango water pump bolt torque specification is 40 pounds. The water pump bolts should be torqued in 20 pound intervals.
According to the chilton manual the 5 water pump bolts torque to 89 inch pounds. The four bolts that hold the water pump pulley torque to 18 foot pounds.
its not hard but time consuming best way to do this is to go get a chilton repair manual it will walk you through it
there is a problem with your engine cooling system, aka your radiator, water pump, reservoir, etc
It's been a while since I worked on a 1G Talon, but I believe the water Pump is located on the serpentine belt. It's the same belt with the crank shaft and alternator. No, you should not remove the timing belt.
It's run by the timing belt near the bottom of the engine. (Passenger side of engine). So you need to remove the timing belt cover to get at it.
the water pump is located under the timing belt cover. in order to replace it you need to remove the timing belt, i would recommend doing the timing belt while your in there too.
usually mechanics torque head bolts to 58lbs that is one of the main cause of blown head gaskit due to powerful engine. it should be torqued to atleast 67 lbs. i have it on my 87 turbo with no problems.
Low coolant? Stuck Thermostat Cooling fan not working Water pump not working Clogged radiator System airlocked Defective radiator cap
The torque of a water pump bolt can be requested from the manufacturer. The Chevy Trailblazer has a high torque for the water pump bolt.