i need to know what torque the head bolts down on my 1996 Monte Carlo cause i just got done doing a head gasgets on and i need to also need to now what to torque the rockers thank u for your help

The rockers are done with the engine running. Turn till they stop clattering and back off a quarter turn for hydraulic cams. Solid cams will have a lash setting on the cam card. have found that for initial startup lash all the rockers at .020 with the lifter at the base of the cam and this will help start the engine and keep it running while you finish the adjustment

🤓

🤯

🤔

Loading...

100 ft/lbs

118ft lbs

Yes, Monte Carlo is in Monaco.

Monte Carlo is in Monaco ! There are 350 kms from Montpellier to Monte Carlo

There is no such thing as a 2010 Monte Carlo, so the answer would be no

No, the Monte Carlo was discontinued in 2007

The town of Monte Carlo is in the country of Monaco

The town of Monte Carlo is in the country of Monaco

it has 160 hp and 185 ft- lbs of torque

190 horsepower 240 pound torque

Monte Carlo is in the country called Monaco. Sometimes people use Monte Carlo to refer to Monaco, which is wrong. So Monte Carlo is not a country, but Monaco is a country.

There is no such thing as a 2008 Monte Carlo, so the answer would be no.

Yes

Monte Carlo Can Be A Car Or I Think Its A Race Track Too

Yes

Monte Carlo is not a country.

There is no such thing as a 2008 Monte Carlo

Yes

The Monte Carlo Show ended in 1980.

Monte Carlo was released on 07/01/2011.

The Production Budget for Monte Carlo was $20,000,000.

Chevrolet Monte Carlo was created in 1970.

Monte Carlo Automobile was created in 1983.

Use a new nut from the dealer and they will give you torque specs for your car..you will need the VIN number for the dealer.

In Monte Carlo, Monaco from April 20th through April 26th, 1987, the Monte Carlo Open was held at the Monte Carlo Country Club where the club's clay outdoor courts were utilized.