I had same problem went to junk yard and got a hazard switch the turn signal relay is in this hazard switch. Removed radio, released bracket, slid out switch and replaced now works fine. I'm a woman and did this so anyone can do it. Provide some more details as to how to remove radio to get to place where you replace the 'Turn Signal' Flasher. Oh, by the way, I have a 2003 Allroad.
Defective flasher module - common problem
It has one flasher that controls both the turn signals and the emergency flashers. If the turn signals are working then the flasher is not your problem. However the flasher relay is located on the drivers side, under the dash, above the fuse block, mounted on the kick panel.
Replace the flasher relay.
Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad. answer always there are 2 flashers.one for turn signals other for hazard replace hazard flasher They have separate fuses also.
Flasher relay bad. This is a separate flasher relay from the one controlling the hazard lights.
The flasher is located under the dash near the drivers side kick panel. There are two flashers, one for turn signals, one for emergency flashers.
Same flasher for left and right signals but a different flasher for the emergency flashers.
Yep, one for the signals and one for the emergency flashers.
what do i try next? i tried a new flasher on the steering column. my flashers work, but turn signals don't.
The signals and the emergency flashers have separate circuits, separate fuses, separate flasher relays. Start with checking the fuses, the bulbs, the signal flasher relay and wiring and if it still doesn't work it may be the signal switch is bad.
There are two relays, one for the emergency flashers, and one for the turn signals. Your turn signal flasher is defective and needs replacing.
Flasher relay is defective. Replace it.