Want this question answered?
why must refrigerant in the suction line be slightly warmer than the saturation temperture
The system will not cool if it is low on refrigerant. Check the suction line and see if it feels cold and is sweating. The suction line is the larger of the 2 and is covered in black insulation. If it is not sweating or if it is warm to the touch, you are probably low on refrigerant. If you have to have refrigerant added more than once, it's a sure bet there is a leak in the system.j3h.
Dirty condenser coils. Blocked suction lines. Low refrigerant charge. Incorrect suction line size. Too much refrigerant. Electrical problems. Contaminants in the system. Insufficient oil lubricant.
A suction line filter is added to the system for a different purpose than the liquid line dryer. A suction line filter is added:A : to keep acidic oil in the system from working its way back into the new compressor.B because the suction makes the acid removal better.C because the suction line is cold and full of acid.D all of the above.
the low pressure{or suction}line is located under the air filter housing
Low airflow, low refrigerant or restriction
A refrigeration circuit is provided with a quench line connecting the liquid line and the suction line and containing a QEV. The QEV is controlled responsive to the superheat of the refrigerant supplied to the compressor. By injecting liquid refrigerant downstream of the suction modulation valve and the sensor for the TXV, the system can be operated at low capacity without overheating the compressor oil.
To add refrigerant to a Dodge Dakota find the suction hose of the A/C system. On the suction hose locate the port to add more refrigerant to the system.
An A/C compressor sucks refrigerant gas from the evaporator inside the car and compresses it into high pressure liquid. So the tubing that goes from the evaporator inside the car to the compressor is called the suction line.
what is suction pressure of r407a
Suction gas
Discharge line is the line in which the refrigerant passes through after being discharged by the compressor. Liquid line is the line located after the condenser, following refrigeration cycle. Suction line is the one that the referigerant is sucked :) in, to enter the compressor.