about 10% to 15% of system charge
about 10% to 15% of system charge
about 10% to 15% of system charge
about 10% to 15% of system charge
Refrigerant compaticilty is about suiting the refrigerant to your refrigerant system. Every cooling system has refrigerant in it which depends on the type of system you use. If the refrigerant not matches with your system, it wont work. This is refrigerant compatibility.
Have dye added to the a/c system run system for a couple of days then check all lines and fittings under a uv light.
To endure that the ONLY gas in the system is refrigerant.
Liquid refrigerant charging of a system is normally accomplished in the liquid line. For example, when a system is out of refrigerant, liquid refrigerant can be charged into the king valve on the liquid line or receiver.
The two basic ways are: 1. charge the system with refrigerant containing a tracer dye, then use an ultraviolet lamp to find the dye at the leak point. 2. use an electronic leak detector, commonly called a 'sniffer' to find the leak. Pressures in an air conditioner can be dangerous. Working on the system requires specialized knowledge. Get some help from an experienced refrigeration tech.
There are 2 , common, ways to detect leaks. An electronic leak detector and dye. Sometimes both are needed. Of course the system has to be full of freon to for the dye to leak out or for an electronic detector to find a leak (just like finding an air leak in a tire). If the leak is at a connection, you may be able to just replace O rings, if a component (Like the compressor, condensor, evaporator) is leaking it will need replaced. If the system has freon in it, the law says to recover it with a recovery machine. There are 2 , common, ways to detect leaks. An electronic leak detector and dye. Sometimes both are needed. Of course the system has to be full of freon to for the dye to leak out or for an electronic detector to find a leak (just like finding an air leak in a tire). If the leak is at a connection, you may be able to just replace O rings, if a component (Like the compressor, condensor, evaporator) is leaking it will need replaced. If the system has freon in it, the law says to recover it with a recovery machine. There are 2 , common, ways to detect leaks. An electronic leak detector and dye. Sometimes both are needed. Of course the system has to be full of freon to for the dye to leak out or for an electronic detector to find a leak (just like finding an air leak in a tire). If the leak is at a connection, you may be able to just replace O rings, if a component (Like the compressor, condensor, evaporator) is leaking it will need replaced. If the system has freon in it, the law says to recover it with a recovery machine.
Liquid
Vaporizing the refrigerant
The refrigerant in the refrigrration system absorbs large quantities of heat and releases it to the atmosphere