inlet 6 though, outlet 8 though
Which motor do you have?
Straight out of the original 1978 Manual: Intake Valve Clearance - Cold: 0.18mm or 0.007" Intake Valve Clearance - Hot: 0.20mm or 0.008" Exhaust Valve Clearance - Cold: 0.30mm or 0.012" Exhaust Valve Clearance - Hot: 0.33mm or 0.013" The manual states these specs are not the same for the 2T-G motor, only the 2T-C
Just wanted to ask if anyone knows the valve clearance specs. For a 91 civic hatchback DX model. Thank you.
Hot adjustment on the 1.3 engine is .009-.011 clearance on the Intakes, and .010-.012 clearance on the Exhaust valves
Yes
The specifications of a Isuzu 6bb1 diesel engine are here. They were made in 1972 by Isuzu Motors. Inline 6-cylinder. 4-stroke/water cooled, OHV/2-valve , direct injection and square combustion chamber are featured specs.
.0002in or .05mm intake and exhaust
Also,do you adjust them warm or cold?
The proton savvy uses a renault 1.2 16V engine code D4F and many specs can be found on line from renault forums. 11 TOP AND FRONT OF ENGINE Cylinder head gasket 11-7 Setting the valve clearances Valve clearance setting values (in mm): - inlet 0.05to 0.12 - exhaust 0.15to 0.22 Open exhaust valve method Bring the exhaust valve of cylinderno. 1 to the fully open position, then adjust the inlet valve clearance for cylinder no. 3and the exhaust valve clearance for cylinder no. 4. Follow the same method for the other cylinders, in the order shown by the table below.
0.004 clearance both valves both sides
.006 on intake, .008 on exhaust
what is the torque specs and valve lash on a 24 hp Briggs
Cat wanst us to pay a dealer for valve setting or spend $ hundreds for maintenance manual. I have searched Internet, CatRVclub & IRV2, found only specs for smaller cat engines. Maybe one could find the military cat C9 manual?