28 mil is 28/1000 inch (0.028 inch)
try Northwest Wholesale Pools, they have an instructional CD for $1 and it shows exactly how to measure for an inground liner. The CD would cost next to nothing to ship, totally worth it...they'll also sell you a liner, I highly recomend them. good luck
To install a shower liner, first measure the shower area and cut the liner to fit. Attach the liner to the shower walls using adhesive or nails. Make sure the liner is securely in place to prevent leaks. Finally, seal the edges and corners with caulk for added protection.
You need to measure both the length and the width, you should check that the measurement is consistent at a few points around the pool. We also like to have the perimeter of the pool. Having the perimeter measurement allows us to double check and adjust a custom liner to ensure that the liner will fit your pool. To do that you usually need a cloth tape measure, about a 100 foot long should work, and you measure around the top on the steel wall, under the top rail, where the liner overlaps (for overlap pools) or the bead clips in (for beaded pools). The last piece of information needed is the wall height. Measure the distance from the top of the cove or sand bottom to the top of the wall (where the overlap or bead receiver is).
That normally depends on where you are getting the liner from, but in most cases, you measure the pool diameter and actual pool wall height. When you order the liner, let the liner manufacturer know the liner is for an above-ground pool with an overlap liner. The liner manufacturer will then make the pool wall enough longer to allow several inches of liner material to fold over the top of the pool wall and anchor it in place with the liner locking strips.
how can i remove algae from my pool liner, I have treated the water but algae remains on my liner
They probably did not install a pump underground(to pump ecsess Water) so when it rains alot or the ground is saturated your pool liner streches. Most vinal pool companies dont.
Invalid conversion: square meters is a measure of area and linear meters is a measure of length or distance.
To install a chimney liner, first measure the chimney flue to determine the correct size liner. Next, assemble the liner and lower it down the chimney using a pulley system or by hand. Connect the liner to the chimney top and bottom, ensuring a secure fit. Finally, seal any gaps and test the chimney to ensure proper ventilation.
It's your choice. The liner should enable you to not wear boxers with them.
I AM HAVING THE SAME PROBLEM WITH AN INGROND VINAL LINED POLL. A SINK HOLE FORMED RIGHT UNDER A SMALL CUT IN THE LINNER, THE ONLY SOLUTION I CAN THINK OF IS TO MAKE THE HOLE JUST BIG ENOUGH TO FILL WITH POTLAND CEMENT AND THEN REAIR THE DAMAGE. IF THAT DOEN'T WORK I SURE ITS GOING TO COST A GOOD BIT TO HAVE THE LINER CHANGED AND THE HOLE REPAIRED.
To install a chimney liner, you will need to measure the chimney, choose the appropriate liner size, and then carefully insert the liner into the chimney. It is important to follow all safety guidelines and regulations during the installation process to ensure proper ventilation and prevent any hazards. If you are unsure about how to install a chimney liner, it is recommended to seek professional help from a qualified chimney technician.
Ocean liner? Truck/SUV cargo liner? Pond liner? Trash liner? Chimney liner? Pool liner? Helmet liner? Panty liner? Dirty one-liner?