The trailer harness plug should be located behind the rear license plate holder. Some 1997 Chevrolet Tahoe's were not equipped with the trailer harness plug.
Auto parts stores can sell you a trailer harness that plugs in between your existing truck harness. The electrical connection used is usually located behind the rear bumper on the inside of the left frame. Directions will come with the trailer harness kit.
Your local auto parts store can sell you a trailer plug harness that plugs into the vehicle's original harness that requires no cutting.
Check with your local auto parts store, they can sell you a trailer harness that simply plugs into your existing harness, very easy to do, just follow instructions. The harness should be in the $25 range.
Your local auto parts store can sell you a trailer wire harness for that vehicle that simply plugs in to the original harness and it is weather tight. It installs in minutes.
Subarus all have a connector for a trailer wiring harness built in. There is a supplemental trailer harness that you purchase from your hitch supplier and it just plugs right in. Instructions are available on-line. This one is for a 2001, but they have been the same for a number of years.
buy the correct harness with factory plugs and plug into the existing taillight harness located up under the rear bumper. most any autoparts store sells it for about 20 dollars
You need to purchase the add on harness from the dealer. This harness plugs into one of the junction blocks located under the driver's side of dash above your left foot area. The other end of the harness attaches to your trailer brake controler. The trailer brake "blue" wire in back is folded back and tucked in the rear harness on the left side of the rear frame rail. You may have to drop the spare tire to expose it and connect it to the trailer connector plug.
very easy .I bought my wires on eBay ,,,the trailer harness plugs right into your lights no cutting at all
The factory wiring harness for the trailers will plug in under the back of the vehicle in the area of the spare tire, the harness plugs into the wiring harness for the tail lights.
It screws into the exhaust and plugs into the electrical harness.It screws into the exhaust and plugs into the electrical harness.
you can buy a wireing harness that just plugs into your existing wires at a parts store, you do not have to cut any wires! just unplug back by your bumper and plug in the new plug. that's it.
It is in the driver side head up front in the middle of the first 2 spark plugs.