Want this question answered?
When a flame on a gas water heater is burning yellow it means that the gas has carbon. It can also mean that the gas has sodium.
The water continues to run into and out of the water heater. There is just no flame to heat it up.
You need a orifice cleaning to remove carbon build up on the flame tube and main burners.
Yes you can if it sits heating for a couple of weeks without use. Open a hot faucet for a minute or two to release this with no open flame nearby,.
There are many places where one could purchase a Blue Flame heater. Some of the best places to purchase a Blue Flame heater would be a hardware store like Home Depot.
In a gas water heater: The gas flame warms the water, exactly the same way as a gas stove burner does for a pan of water on the stove. In an electric water heater, an element - same as an electric range element, but a different shape - heats up from electrical current, and transfers that heat to the water.
if you live in the UK you can buy a blue flame heater from TGS Industrial supplies Ltd
You don't. Do you have a hot water heater? What do you suppose happens to the natural gas when it hits the flame down underneath?
bacasuse it goes every where and more easy a than gating wood yo just push the button
Sometimes it can take up to TWO MINUTES for the thermocouple to take effect ( proof of flame) If the flame does not stay on the thermocouple should be replaced by a qualified licensed plumber
"A water heater stores water in a tank and heats the water with a flame at the bottom. The hot water rises to the top of the tank, while the colder water falls to the bottom near the heat source." A water heater is simply a tank of water with a heat source at the bottom. It can be set to a certain temperature and is dispersed throughout the home through the water infrastructure.
What does the go cart do when flameout button is expressed