Want this question answered?
find the wiper fluid fill and fuse panel, you will see the power control module, and transmission control module, bolted together, normally gray in color, all wires lead to the boxes, so it cant be hard to find
1991-1993 DeVille blower control module (power module) location If you are standing in front of the car with the hood open, look left of center on the firewall for a cover that says "Maxi Fuse / Relay Center" remove this cover (two 1/4 turn fasteners on the front and one sheet metal wingnut on the top near the hood hinge). Underneath the fuse and relay center, you should be able to see the blower control module (power module) bolted to the top of the evaporator / blower module. Wires to the connector are color coded; Black, Purple, white and red. Cadillac Man
Looking for the ESC myself....the Knock Sensor wire is blue though.
The green wire is the negative and the yellow is the positive. It should be marked pos and neg on the module.
What is color for hot wire on a 1996 mazda b2300 truck for radio
Ignition power control is located on the intake driver side next to intake motor control looks like small module black color. This is for 95 diamante with 3.0 SOHC engine.
One of the standard factory colors for a Mazda pickup is the color white. Another of the standard factory colors for a Mazda pickup is the color dark grey.
12
No. The color is determined by the star's temperature, not location.
what is the color order of the wires to a Pontiac Sunbird ignition module
12
The Ignition Diagnostic Monitor (IDM) information is sent from the Ignition Control Module (ICM) to the Powertrain Control Module (PCM computer). The PCM monitors this information to check on the Ignition System. The ICM is Black in color in 1994 and newer Ford Trucks. Do not use a Gray module as it will cause the PCM to output a code of a missing IDM signal. Auto Part stores have the wrong part listed for these trucks.