answersLogoWhite

0

The Blitz Audio Bridgeable MOSFET Power Amplifier with Lighted Blue Neon Accent Rods BZA2160 is perfect for what you're looking for. It's affordably priced, has plenty of power, and has stylish blue neon bars which will illuminate the area around the amp.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why won't trunk lights come on?

On VWs trunk light may need to have headlights on to operate.


Replace tail light sc400?

You have to remove the carpet material in the trunk and remove the screw caps etc. and the lights come out.


How do you change brake lights is 200?

if u want to know how to chang brake light in the trunk theres the rug pull it back and u will find the back of the tail lights twist the light socket n it will come out


How do you change the tail light assembly on a 2005 Chevy Cobalt?

Open the trunk and pull the carpeting back from the rear lights and there are 3 or 4 twist nuts that you take off and the light will come out, do this on both sides.


Where in the trunk is the controller for the brake lights located in a 1991 Toyota Corolla?

If by 'controller' you mean the switch that makes the brake lights come on, it is not in the trunk. It is located underneath the dashboard, next to the brake pedal.


Why does your alarm not work on your 2010 Nissan Altima?

Check and see if the interior lights come on when you open each door. open one if lights come on shut it and wait for the lights to go off and then open another until you open all the doors. if the lights don't come on with one of the doors it will be a bad door switch on that door. if lights come on on all doors it may be the trunk. check and see if you have a trunk open warning displayed on the information center on the instrument panel. if so the car thinks the trunk is open and alarm won't set.


How do you remove the tail light covers on a 2006 Chrysler 300?

The tail lights are one piece, the lens does not come off. You remove the assemblies by removing retainers form inside the trunk.


Does anyone know why my rear tail light indicator came on and followed shortly by my check engine light since the rear tail lights and brake lights still work?

Check the wire which supplies energy for tail lights (the junction between the trunk and the car body). If it's broken it will cause the check engine come on.


What is wrong with 1999 Sonata whose trunk open dash lights are always on?

The switch in the trunk that is on the locking mechanism itself needs adjusted or if you don't have time to mess with it really just disconnect the wire going to it the trunk light wont come on until you hook it back up though that little light on the dash will run your battery dead because its really telling you that the big one in the trunk is on too.


How could you use mercury to make a switch to turn on a light when the trunk of a car is open?

You do not need mercury. Just install a door jam switch in the trunk wired into a light in the cat so that when the trunk is open a light will come on in the vehicle.


How do you change the rear brake and signal light in a 1996 corolla?

Lift up the trunk and next to the rear light cover you want to take off, where the trunk comes down there are 2 screws. remove them. take the carpet off on the wall in the trunk opposite to the rear light cover. in the middle of that back panelthere is a nut connected to a bolt. remove it. the rear light cover should come off. where the lights go into the cover they are labeled for what their purpose is and what color the bulb. to remove the bulb just twist the bulb holder and it should come out of the light cap. reassemble the parts in reverse order


How do you change the brake lights on a 96 avenger 2.5L V6?

Open your trunk. You will see 4 or 5 bolts coming thru the frame of the trunk. Take the nuts off those bolts from the inside of your trunk and the entire mount will come off. Take the wires running to the back of the light and turn counterclockwise. The bulb will come out of the housing. Take the bulb out and replace. Put everything back together and you are finished.