answersLogoWhite

0


Best Answer

A bus is orange.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What Color is A bus?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Electrical Engineering

What is a bus tie?

it is the tie of bus


How can you calculate the copper bus bar according to the amp?

To obtain the amp of the copper bus bar, multiply the width of the bus bar by the thickness of the bus bar to obtain the current carrying capacity of the bus bar.


Difference between bus bar and bus duct?

Bus bars are actually simple conductor strips of copper using for connection between one system to another.for example transformer to panel. bus ducts are enclouser of that bus bar


What are the types of bus bar arrangements?

Single bus is used in smaller, less important substations. A fault on the bus requires tripping of all lines into the bus. When higher redundancy is necessary, ring and breaker and 1/2 schemes are used. These are the three most common.


What is double busbar arrangement?

Double bus bar is related to power control center (PCC). PCC is the main LT power distribution in any industrial establishment or large residential complex too. It basically an electrical panel with required number of incomer feeders and outgoing feeders. Power source like state power or captive power provide the incomers and outgoing feeders cater to the down stream power panels for further distribution( to MCC). Any PCC has one or more incomer and one or more outgoing feeder and bus isolators depending on the requirement. This PCC needs to have a bus bar to which the incomer gets connected and feeds the power to the bus and the outgoing feeders are connected to the bus bar to deliver the power down stream. This bus bar can be single bus bar system or double bus bar system. In a double bus bar system the two different power sources are connected to two different bus. Say one bus is for DG set power another bus is for SEB power. Both the buses can be charged simultaneously and can feed any outgoing feeders. The out going feeder have flexibility of getting the power either of the buses, but not simultaneously from both the buses. Double bus bar is more expensive compared to single bus bar system but more flexible, reliable.