0
To obtain the amp of the copper bus bar, multiply the width of the bus bar by the thickness of the bus bar to obtain the current carrying capacity of the bus bar.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What size wire for a 40 amp breaker?
A 40 amp breaker is used in conjunction with AWG # 8 copper wire. The black and red wires are connected to the breaker. The ground wire is connected to the ground bar and the white wire is connected to the neutral bar.
Do you need a 20 amp single or double pole breaker for your washer?
Washing machines in the U.S. operate on 120 volts. That requires a single pole 20 amp breaker and wired with 12/2 w-ground wire. Black to the breaker, white to the neutral bus bar, and copper ground to the ground bus bar.
What is size of copper bus bar for 1000 Amps capacity for a current density of 1.2 amps and 1 amp?
The following sizes of bus-bar will have the capacity to handle 1000 amps, 3/16 x 4", 1/4 x 3 1/2", 3/8 x 2 1/2", and 1/2 x 2".
How you can find the 4000 amp on bus bar size?
There are two temperature categories for copper buss bar. For a 30 degree C rise the sizes are 1/4" X 1" or 3/8" X 3/4". For a 50 degree C rise the size is 1/4" X 3/4". Both of these temperature categories will handle 400 amps.
What is the rising main unit in electrical distribution?
This is the distribution of power through copper bus bar
What size wire for a 40 amp breaker?
A 40 amp breaker is used in conjunction with AWG # 8 copper wire. The black and red wires are connected to the breaker. The ground wire is connected to the ground bar and the white wire is connected to the neutral bar.
How do you convert bus bar to amp?
Bus bar is a physical component that carries the current. AMP is unit of current. They can not be converted
Do you need a 20 amp single or double pole breaker for your washer?
Washing machines in the U.S. operate on 120 volts. That requires a single pole 20 amp breaker and wired with 12/2 w-ground wire. Black to the breaker, white to the neutral bus bar, and copper ground to the ground bus bar.
How you calculate the proper size of copper bus bar for 1200 Kw load?
You first have to find out what the load amperage is going to be and second, what is the working voltage.
How can you tell the difference between a bar of iron a bar of copper and a magnet?
Iron is a ferromagnetic metal, and copper is not. Iron will be attracted to the magnet but the copper will not.
Where can one purchase a cheap copper bar sink?
Copper bar sinks can be found for a low price at many home improvement or bar specialty stores. Lowe's, The Home Depot, and Copper Sinks Online all have an inexpensive selection of bar sinks.
If a bar of copper is brought near a magnet the copper bar will be what?
If a bar of copper is brought near a magnet and rubbed it will get magnetized and would behave like magnet. But this would be temporary and this property would wear after some days.
How do you know what wire is ground on 200 amp service?
On a 200 amp or any size service the ground wire is easily identified. Look in the distribution panel for the neutral bus bar. This is where the service neutral (white wire) is connected to the distribution panel. There you will see a bare copper wire connected to the same neutral bar. This is the ground wire that is connected to the ground rods out side of the house.
Why a bar of the brass is harder than a bar of copper?
Because brass is an alloy of copper & zinc - the zinc atoms change the geometry of the copper crystals - making it less flexible.
A bar of copper has a mass of 216 g and a volume of 24 cm3 what is the density of copper?
If a bar of copper has a mass of 216g and a volume of 24 cm3 then its density is 9 g/cm.
What would the value of pure copper bar be?
As of 23 February 2016, copper is worth $2.11/pound. The value of the bar depends on the weight.
Why a bar of the alloy is harder and stronger than a bar of copper?
copper is one of the weakest metals. alloy is pretty strong almost like titanium
