Because brass is an alloy of copper & zinc - the zinc atoms change the geometry of the copper crystals - making it less flexible.
No, a bar of soap is to heavy to float on anything.
I am interested in the answer to the posed question, can you cad weld re bar to copper ground wire? If you can do you protect the dissimilar metals with No-ox or some other treatment? No treatment of the copper cable to rebar in necessary after the exothermic weld is complete (Cadweld). Just pour concrete.
The level of measurement of a bar code is nominal.
use a bar chart when comparing data. for example, you would use a bar chart to compare climates of different cities.
A ruler bar allows you to format the vertical alignment of text in a document.
copper is one of the weakest metals. alloy is pretty strong almost like titanium
The term "bus bar" refers to a strip of bar of brass, aluminum, or copper. This strip of bar conducts electricity with a distribution and switch board.
an iron bar is harder to bend.
Yes, Gymnastics is harder than free running because you have to flip and back flip and do uneven bar's. So yes it is harder.
Yes and no. If you melt the bar into a liquid copper, than yes, if you just bang on it until it forms into awire shape, then no
The copper has a higher thermal expansion coefficient than the iron. The copper wants to get longer relative to the iron so the bar bends away from the iron strip. For example if iron is on top and copper on the bottom the bar bows downward. This seems opposite to your question conclusion
Brass is an alloy of copper and zinc, and has been in use for thousands of years. It retains many of the good properties of copper, whilst being cheaper than that. Other than steel, it is probably the next most common alloy. It is readily re-cyclable. It has valuable anti-bacterial properties. As far as the retail value of brass, that depends upon the purity of the sample, and the local demand.
Tin and copper make bronze, with bits of coal to make brass. some may think it makes a solid bronze bar by playing runescape, alot of things in runescape are incorrect when it comes to the ores, smelting, and smithing
Brass does not oxidize easily, and a brass towel bar if properly plated will not either.
Iron is a ferromagnetic metal, and copper is not. Iron will be attracted to the magnet but the copper will not.
It really depends on what type of brass bar one is talking about. Brass bars can be used to be made into many things including shower handle bars, coat racks, and other decorative pieces.
To obtain the amp of the copper bus bar, multiply the width of the bus bar by the thickness of the bus bar to obtain the current carrying capacity of the bus bar.