0
I am interested in the answer to the posed question, can you cad weld re bar to copper ground wire? If you can do you protect the dissimilar metals with No-ox or some other treatment? No treatment of the copper cable to rebar in necessary after the exothermic weld is complete (Cadweld). Just pour concrete.
What else can I help you with?
Can you take welded things apart?
In a good weld, the filler metal and the base metal melt together then solidify, so it's not as simple as scraping glue off a piece of wood. To get all of the weld metal off, you need to grind off some of the base metal also. If you grind a weld away so the surface(s) are flush, there will still be some weld metal mixed with the base metal where the weld was. That can sometimes be hidden pretty well, but it's usually possible to detect it with close inspection, liquid penetrant testing, or other techniques.
What is used to weld sheets of the tower?
Manufacturing Towers. 1) A tubular tower is made of a lot of sheets of iron that are welded together. The large sheets arrive at the tower factory in a truck. ... Awelding robot is used to weld the plates together.
Steps and procedures to make a tee joint?
This is how to join two cables In electrical engineering Field. Firstly, get the cables (One will act as main while the other one will act branch cable) and make sure they have the qualities a good conductor must have. About 5 inches of the main cable should be bared using plier and same applies to the branch cable. The exposed branch ( after the removal of the insulator that cover the wire) must be divided and made to form a 'Y' shape, so as to form a two flat strips. The strips are then wrapped round the main cables in opposite directions. That is just the simple steps involved in making T joint I hope this helps? Thanks for reading. T.L
Can you weld mild steel without argon just CO2?
Probably but the results may not be acceptable. Keep in mind that companies spend a lot of money testing and experimenting with different types and mixtures of gasses to determine the best single or combinations to use. In MIG welding steel using Argon/CO2-75%/25% is recommended. In TIG welding (most metals) pure Argon is recommended.
Is it ok to weld galvanized steel with a mig using flux core wire?
Yes but make sure you do not breathe in the vaporized Zinc fumes, it can make you very ill
What is weld used for?
A welding cable is used for joining or linking up wires or cable. Welding is the process of joining two things together, and the cable is the connector.
I have a Lincoln ideal Arc SP 250 wire welder and when you pull the trigger to weld there is about a 3 second pause I need to eliminate?
Maybe maybe not. The gas has to flow to the weld area to protect the weld puddle. This may be what is happening. If you have a long cable to the gun this is a good feature. Check with a welding rep/salesman from your local welding supplier.
How close can one weld be to another weld?
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
Who is Theodore Weld?
Theodore Weld
Where is the Weld Public Library in Weld located?
The address of the Weld Public Library is: 25 Church Street, Weld, 04285 0120
Where is the Weld Historical Society in Weld Maine located?
The address of the Weld Historical Society is: Po Box 31, Weld, ME 04285-0031
What is the difference between butt weld and socket weld?
A butt weld is a weld made between two straight cut profiles , a socket , or plug weld is made between a surface and a hole.
When was WELD - AM - created?
WELD - AM - was created in 1956.
What is the past tense of weld?
The past tense of weld is welded.
What is the birth name of Bill Weld?
Bill Weld's birth name is William Floyd Weld.
What is the birth name of Tuesday Weld?
Tuesday Weld's birth name is Weld, Susan Ker.
What kind of odometer does a Mazda truck have?
The 86-93 have a analog gauge.I am most certain older mazda trucks are the same.The speedometer is operated by a cable going into the back of the speedometer itself and feeds thru the firewall and goes down the inside fender weld and along the driver side frame rail where it will connect to the transmission. Then it will turn the cable inside operating the speedometer.As for the 94- up should be analog cable driven.If your speedometer is slow working removing the cable from the transmission and remove the dash cluster and disconnect and pull it out.Greasing the cable by spraying white lithium grease into the cable ends or pulling out the cable inside the housing and grease and reinstall.In short disconnect from trans 1st then at dash 2nd.Most issues are slow,jumpy and cable needs to be greased in most cases.Very seldom do the analog speedometers go bad(normally).
