The ABS will not function if needed and the ABS light will remain illuminated.
Removing the ABS fuse can be very dangerous. With the antilock braking system not working, if you apply the brake pedal you run a risk of the tires locking up, causing the car to skid dangerously.
Not sure about a recall, but to temporarily deactivate it, you can pull the ABS fuse, which should be located under the hood.
ABS fuse is located in the engine compartments fuse block, the owners manual ussually lets you know where the fuse is and the amperage.
the abs fuse is under the hood on driver side
Pull the ABS fuse located in the under hood fuse box. Pull the ABS fuse located in the under hood fuse box.
Which fuse box location does the abs fuse has on a 2000 Chevy Monte Carlo SS
The 1994 Chevrolet Astro Van ABS fuse is located in the fuse box. The ABS fuse will be in the second column, third from the top.
Remove the abs fuse under the hood in the fuse box
fuse abs pontiac aztek 2002 located
I believe that's the only way, abs systems are expensive, you can take one out of junkyard version of your car for probably 10 bucks.
AnswerABS stands for Antilock Brake System. If the light stays on, then there is a problem with the ABS system. You will have normal braking but the ABS will not function. Check the 60 amp fuse in the fuse box. If missing or blown, the ABS light will be lit on the dash panel.If the fuse is missing, it disables the anti-lock feature of the braking system. If the brakes are otherwise in working order, you will still be able to brake. ABS can be disabled this way if the ABS module is causing braking problems or if you just hate the way ABS feels. Note that a sticky front brake caliper can cause the ABS to activate at the wrong time, releasing the brakes when you wish to stop. :-o I had the fuse removed from the fuse box for this reason until the caliper was replaced.If the fuse is blown, you will probably want to find out why. A brake specialist or auto electrician may be needed.
In your fuse panel , on the drivers end of the dash ( removable plastic cover is visible with the drivers door open ) If fuse # 14 is a 20 amp fuse , you have rear ABS If fuse # 14 is a 10 amp fuse , you have 4 wheel ABS ( Yes , that is correct , the 10 amp fuse means you have 4 wheel ABS brakes )