0
What Gauge set hoses used for field service work should have self-sealing connectors or hand valves in order to?
Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you make the connectors equal 5 on Steamworks island?
At Sully's, the terminal indicates that it needs a steam pressure of 5. Using the Steam battery, which has a base pressure of 10, you need the connectors to equal -5 (10-5=5). Shift the path of the connectors away from the +2 and +1 valves, and toward the -1 and -2 valves. You should only have to move three or four to get the proper -5 in the indicator dial.
Gauge set hoses used for field services work should have self sealing connectors or hand valves in order to?
minimize refrigerant realease when hoses are connected and disconnected.
Where are the ac service valves on a 1988 Chevy Corsica the 4 cly thank you?
The 1988 Chevy Corsica air conditioning service valves can be found on top of the air conditioning compressor. The air conditioning service valves are labeled as the low pressure valve and the high pressure valve.
What should be the gap for the tappets on a 1993 Ford Fiesta 1.3?
Inlet valves should be 0.2 mm Exhaust valves should be 0.3 mm
What are dispensing valves?
Dispensing valves are in-line valves for on-off service in dispensing liquids from storage containers. Flow will occur when the middle of the valve is pinched and will continue as long as finger pressure is maintained.
Should the intake and exhaust valves be close when the?
Yes the intake and exhaust valves have to be close.
What is the valve clearance on a Honda 400ex?
The exhaust valves should have .005 inches of clearance, and the intake valves should have .004 inches of clearance.
What is available on the aeroquip site?
The company Aeroquip Express produce a range of hoses, fittings, connectors and valves on their webpage. The Eaton company work in the electrical, hydraulic and mechanical industry.
Why is it necessary to insure that the Air conditioning service port caps containing good seals are installed?
To keep the service valves clean.
What position should control valves be in?
open
When you align timing marks and have it TDC the cam valves should be closed on compression stroke?
should be in between intakevalve movement and exhaustvalve movement Yes, valves should be closed.
What is the purpose of service valves on the 10K BTU refrigeration unit?
Isolating compressor for replacement.
