0
Add your answer:
Earn +20 pts
Are shims required on a 305 marine engine starter?
Check the backlash between the starter drive and the ring gear after installation. If it's too tight, use shims.
Where is the pcv valve on a 1998 Toyota Sienna?
If you stand facing the engine, the PCV valve is on the left side top of the engine near the back. It is connected to a short (6 inch) tube. It's difficult to get at, but you can see it and get at it if you reach back in and use a flashlight.
Does 4A-FE need valve clearance adjustment or not?
the only reason that this might need to be adjusted is if there was interior engine work done like a new cam or removed shims, if not, then the answer to your question is no. The service manual for 1990 4A-FE Corolla recommends that the valve clearences be checked every 60,000 miles or 72 months. This is "Schedule B" for normal driving as opposed to "Schedule A" for more demanding use of the engine. The clearances are checked by removing the valve cover gasket and checking them with a feeler gage. The valves can be adjusted by using small circular shims. It may be that in practice the valves hardly ever need adjusting. I think this is a remarkably durable engine.
Does 4A FE need valve clearance adjustment or not?
the only reason that this might need to be adjusted is if there was interior engine work done like a new cam or removed shims, if not, then the answer to your question is no. The service manual for 1990 4A-FE Corolla recommends that the valve clearences be checked every 60,000 miles or 72 months. This is "Schedule B" for normal driving as opposed to "Schedule A" for more demanding use of the engine. The clearances are checked by removing the valve cover gasket and checking them with a feeler gage. The valves can be adjusted by using small circular shims. It may be that in practice the valves hardly ever need adjusting. I think this is a remarkably durable engine.
What size shim should you use for Chevy s10 starter?
Every application is different. Some use shims and others use no shims.
How do you replace valve guide seals 1987 Mazda B2000?
1. remove valve cover bolts. 2. use a screwdriver or small pry bar to remove valve cover 3.fill engine with gasoline. 4.carefully strike a match, and toss it into the engine. 5. locate your nearest used car dealership. 6. buy a Toyota.
Can you adjust the valves on a 1995 1.6 liter 16 valve engine?
yes you can adjust the valve clearance of the engine of your suzuki. they use a special tool to make the clearance of the valve. better to ask an expert to do it because if you make mistakes on the adjustments your engine will be damage. yes you can adjust the valve clearance of the engine of your suzuki. they use a special tool to make the clearance of the valve. better to ask an expert to do it because if you make mistakes on the adjustments your engine will be damage.
What is difference between valve and port?
valves are use in four stroke engine, and ports are use in two stroke engine.
Why do we use throttle valve in steam engines?
For a steam engine, the steam(throttle) valve that sets the engine speed/power is often known as a regulator. k.Shiva
Can the 1zz Toyota engine fit on the 3zz Toyota transmission?
yes it will fit..both use the same transmission
Which car brand used 22r engine?
The 22r engine was used mainly by the Toyota car brand. Though they don't see as much use in this day and age, some Toyota models still use modified versions of this engine.
Are cedar shims ok to use in a window?
Yes, as a matter of fact it is wise to use cedar shims to install vinyl windows. Using cedar shims can make sure the window stays level, this way, another person can nail the window perfectly in place.
