0
What action should be taken if tools or equipment is not in full working order prior to use?
Wiki User
∙ 7y ago
Before you use a tool on your work piece make sure that the tools are not loose or indeed broken which can cause harm to yourself or others around you.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How regular maintenance of equipment can help minimize waste?
Preventive maintenance of equipment such as oil changes, air filters, adjustments, and greasing keeps the equipment in proper working order and prevents breakage of expensive parts not due to normal wear and tear. Not keeping up with oil change intervals will cause an engine to wear out or fail earlier than expected and cost the owner money that he otherwise would not have had to spend............waste. Same for greasing of bearings and joints, the bearings will wear out and joints will freeze or become worn to the point of needing to be replaced causing costly repairs and down time for the equipment. The business owner needs his equipment to last as long as possible and he needs it running all the time so as not to stop production costing sometimes far more than the actual repairs.
What is the difference between reorder point and reorder level?
Reorder point is deals with the specific time in which you should place an order with your supplier. Reorder level is the specific quantity that you should have on hand when your order is placed.
Discuss the principles of a good plant layout What are its objectives Mention the factors affecting a plant layout?
A scientific criteria for determining a good Plant Layout:1. Integration:Integrates of men, materials and machines and support services in order to get the optimum output of resources.2. Cubic space utilization:Utilization of both horizontal and vertical spaces and height is very important to use the space as much as possible.3. Minimum distance:Minimum travel of men and material should be implemented means; the total distance travel by the men and material should be minimized as much as possible. Further straight line movements should be promoted.3. Floor:Arranging the floor to move the material/finished products in forward direction towards the final stage.4. Maximizing coordination:Entry into and disposal from any department should be in such manner that it is most convenient to the issuing or receiving departments. The layout should be consider as a whole.5. Minimum flexibility:The layout should be able to modify when necessary.6. Maximum accessibility:All servicing and maintenance points should be readily accessible. For example; equipment should not be placed against a wall because necessary servicing or maintenance cannot be carried out easily. Further; equipments or other necessary units keep in front of a fuse box will impede the work of the electrician.7. Safety security:Due consideration to industrial safety methods is necessary. Care must be taken not only of the persons operating the equipment, but also of the passes-by, who may be required to go behind equipment as the back of which may be unsafe.8. Minimum handling:Reduce the material handling to the minimum. Material being worked on should be kept at working height and never have to be placed on the floor if it is to be lifted later.The following principles also can be taken in to account when planning for a good plant layout;The geographical limitations of the site;Interaction with existing or planned facilities on site such as existing roadways, drainage and utilities routings;Interaction with other plants on site;The need for plant operability and maintainability;The need to locate hazardous materials facilities as far as possible from site boundaries and people living in the local neighborhood;The need to prevent confinement where release of flammable substances may occur;The need to provide access for emergency services;The need to provide emergency escape routes for on-site personnel;The need to provide acceptable working conditions for operators.
What types of industry would use centrifuge equipment?
Several types of chemical companies make use of centrifuges in order to separate components. Other industries that use centrifuges include some industries that are involved in biological research as well as the nuclear power industry.
What is the minimum temperature working inside a factory?
Regulations vary by country. In the US there is no minimum temperature for working inside a factory. The requirement is that employees not suffer injury or illness as a result of the work they do or the places in which they work. Some factories need to be cold in order to successfully make their product, or to properly maintain intermediate materials. Then the employer is required to assess the hazard from the reduced temperature and ensure that adequate protections are provided. That might involve wearing heavier clothing, providing heavy coats, etc.
What action should be taken if tools and equipment are not in full working order?
If the tool is not in full working order it should be removed from service and either replaced by a new tool or sent away to be fixed and calibrated.
What is the act of working the soil by using a piece of equipment in order to prepare a seedbed?
Tilling or Turning.
Securing The Correct Mining Equipment ?
Securing the correct mining equipment for the job should be a process of elimination for the corporate or private buyer in question. They should be sure that the equipment has all of the features needed in order to get the job done without having to order additional machinery.
In order to provide training on new equipment one should conduct a?
workshop
What information should I know about used commercial kitchen equipment before purchasing it?
You should make sure that all of the equipment is working properly. Also be sure that no part is missing and everything is in clean and working order. If the equipment is older, make sure that parts are available if something breaks.
What kind of programming structure should you use when you want to perform an action and then perform another action in order?
You tell me
When should a pleasure craft operator check the boat is in good working order?
Every day when being used, whether or not there are other passengers. Boats should have minimal Coast Guard required equipment on board (life vests, fire extinguishers, ropes, etc).
What are the health implications of purchasing used fitness equipment?
The use of fitness equipment is not invasive, so there is no "health implication" in term of the transfer of disease. As with any fitness equipment, it is wise to make sure that the machine is well maintained and in good working order. It is also advisable to know how to properly use it in order to avoid injury.
Is it ok to buy used weight training equipment?
If you buy used weight training equipment, be sure that everything is in working order. Have someone who knows about the workings of the equipment go with you if you are buying used merchandise from a private party. Otherwise, buy from a reputable dealer in your area.
Can you repossess computer equipment from non paying customer without a contract?
In the absence of a contract establishing your legal rights to the equipment, and the buyers payment obligation to you, no, not without a court order. Depending on the value of the equipment you may want to consider filing your action in Small Claims Court.
What are the jobs of a surgical technologist?
Surgical technicians ensure that all of the equipment needed for the procedure is properly disinfected and assembled. They also check that the equipment is in working order. They place sterile solutions in areas where they can be easily reached by doctors
Your action replay won't take codes that work on my friend's action replay what should you do?
you need to upgrade it in order for some to work. (use the action replay manager to upgrade it.)
