Want this question answered?
Dont start the car as you're connecting the cables -APEX
Check fuses.
Repeated discharging of the battery will destroy it. Connecting the cables in reverse will destroy the battery. An alternator that is overcharging will also destroy the battery. Vibration and or dropping the battery will do it no good. Lastly is age. Over time the battery will cease to function.
that's normal Make sure you are connecting pos to pos, neg to neg.
"Sparking" When Connecting a BatteryWhen sparks occur on connecting a battery [IF the cables are connected to the proper terminals and in the proper order] is an indication that some of the electricity using devices [clock, computers, etc.] in the vehicle's electrical system are drawing electrical current.IF the battery cables are being connected properly, this sparking is normal, causes no damage, and is nothing to be concerned about.
You will not get electricuted by a car battery. It has only 12 volts and that will not cause you any harm. The sparks that come from connecting the battery or connnecting jumper cables are just electrical current being transferred.
Normally connecting the cables in reverse order can cause it to explode. Overcharging can also cause the battery to rupture but it is highly unlikely it would explode.
You can jumpstart your BMW 328 by connecting jumper cables to your battery and to the battery of another vehicle. Connect the red handles to the positive post, on each battery. Connect the black handles to the negative posts, on each battery. Start the working automobile to charge the nonworking battery.
have the cables been checked. same happened to my 87 same problem found it was the orgnial cables needed to be replaced.
You can jumpstart your BMW 328 by connecting jumper cables to your battery and to the battery of another vehicle. Connect the red handles to the positive post, on each battery. Connect the black handles to the negative posts, on each battery. Start the working automobile to charge the nonworking battery.
There are many cables and components to a computer. The main cables for connecting the computer would be the power cable, and an Ethernet cable for connecting a non wireless PC to the internet.
01. RJ45 is the connector designed for connecting Cat5/Cat6 cables. It is not used for connecting fiber optic cables.