Find the belt tensioner and using a socket and ratchet move the tensioner wheel and arm upwards just enough to slip the belt out from under the tensioner wheel.
Make note of routing pattern for old belt so new belt can be installed exactly the same.
You will need to loosen the serpentine belt tensioner pulley on your 2002 Chevrolet Avalanche. Slide the belt tensioner to the right. The serpentine belt will become loose and can be removed. Reverse the process to install the new serpentine belt.
This car doesn't have a serpentine belt. It has 2 drive belts.
The belt is bad if it has 3 cracks per square inch.
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.
How do you route a serpentine belt on a 1992 Cierra Oldsmobile
how to replace a serpentine belt on 1992 grand am 2.3l
You firts pull out the battery, and then you slip out the starter cables, and right where the belts are you snap those and that's where the serpentine belt should be changed.
In the belt book at most autoparts stores have a diagram section for serpentine belt routing.
Where can i find a serpentine belt diagram for a 1993 s-10 chevrolet blaze?
The 1999 Chevrolet Silverado serpentine belt assembly diagram can be obtained from most Chevrolet dealerships. The diagram is usually provided when you purchase the serpentine belt.
How do you change a serpentine belt on 2006 Envoy
Hi their should be a diagrahm on or around the fan shroud