answersLogoWhite

0

it depends on alot, alot of things. but id say to be safe a 2000 watt. but the best amp would be a sundown saz1500d

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

1200 watt wiring kit suitable for a 800 watt amp and 1100 watt sub not sure whether this would have a effect on the cables?

1200 Watt wiring is more than enough for an 800 Watt amp. The rating of the sub doesn't make any difference to the cables. If you want to use the sub to its rated power you should get a bigger amp. If the amp can only give out 800 Watts and the sub can take 1100 Watts then you can put a bigger amp on. It is still going to be loud as with an 800 Watt amp. I have a 300 watt amp with a 1200 Watt sub and people hear me coming.


Can you use a 1000 watt amp and a 400 watt amp on 2 subs can they be wired together to give you 1400 watts for both subs?

no you can't. if you want to run separate amps for your subs they both have to be the same amperage and preferably same model. you can use the 1000 w amp on the subs and get a nice amount of bass depending on what size and model subs you have. then just use the 400 w amp for your mids and run the highs off the radio lines. try that and you will hear some good sounds. you will also need a crossover as well. hope that helped.


What sub should I get for a 1100 watt mono amp can I use two and wire them together how many watts should they be?

Depends on the rms or continuous rating of the amp and at what ohm is the amp stable


Can you use 2x500 watt subs on a 600 watt amp?

Absolutely!! If you turn up the gain too much, the speakers will smoke. You can use it at a lower level


What size kicker amp do i need for a kicker comp subwoofer. do i need the mono or class d amp 300watt?

When buying an amp its best and safe to use the 1:1 ratio. That would mean if subs RMS was rated at 350 watts then get a 350 watt amp. Alot of installers will use 3:1 ratio because the subs max rated at 1200 watts so they say you will need a 1200 watt amp. But the truth is that sub may only peak a fraction of a millisecond. So unless your competing for a title championship there is no need to destroy you subs that you paid so much for.


For your two 12 inch kicker cvt12 subs which put out 400 RMS each should you use a 750 watt or 1000 watt amp?

Did you get the 2 ohm or the 4ohm? I have a 750 mono on my single 4ohm and have no where near enough power.


Would a 12 volt battery need to use a capacitor to run a 1000 or 760 watt amp?

I have a 760 watt amp powering 2 10" subs and it works fine. my brother has a 1000 watt amp powering 2 12" subs and he got a capacitor. So it really depends on what amp your looking at. if the 760w you wont need one, if the 1000w i would be safe and buy a capacitor. for the 1000w amp you would only need a 1 or 2 farad capacitor.


What Wire kit do you use for a 180 watt amp?

18 gauge


How many amps does a 60 watt light use?

About 1/2 amp.


I just bought 2 Kenwood 12 1400watt subs and I was wondering what kind of amp I would need to power them?

It's always a good idea to have a much more powerful amp than subs, that way you have a little bit of room to play with without maxing out your amp. So, either a 2800 watt amp, or a 3000. Although, something smaller wouldn't hurt either, a 2000 watt amp would be just fine. Make sure that the amp is only a two channel, if its a four then that means you'll be wasting power on two channels you would ever use, so if you get a two channel, the amp will be strickly dedicated to just your subs. BUT! with that much power, its always a good precaution to upgrade your battery wires, which are proabably standard 4GA to maybe even a 0GA or 1 ferad. Then maybe install a Capacitor. These Precautions will prevent your alternator and or battery from going bad. It sucks having to change your car battery every couple months, believe me. Good luck


Can i use a 8 gauge 1200 watt power wire for a 1000 watt amp?

A #8 conductor is rated at 40 amps. Wattage is the product of amps x volts. As you can see the voltage is needed in this question to answer it. In the electrical trade I have never come across the terminology watt amp. Volt amp, yes.


How many watts on a 40 amp circuit breaker?

about 4800 watt but should not use it 100% so to be safe 4000 watt (80%)