0
right before the compressor
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Best leak detection test is when refrigeration system is?
A vacuum
What is the importance of ammonia detector while dealing with refrigeration system?
This type of detector is of no importance for electric powered refrigeration systems, as ammonia is not used in them. This type of detector is a safety device for natural gas and propane powered refrigeration systems as ammonia is the coolant in such systems and a leak of ammonia vapor is toxic.
What will happen if there is moisture in refrigeration system?
1.It can enters to the compressor through suction line and can damages the parts of the compressor.2.it can carry out
What are the six states of a refrigerant in a refrigeration cycle?
what are the six states of a refrigerant in a refrigeration cycle
Refrigeration can be described as?
Refrigeration is a process in which work is done to move heat. It was a closed-cycle that could operate continuously, as he described in his patent.
Pressure in a refrigeration system is changed where?
pressure in a refrigeration system is changed in the
Why COP is used for evaluation of compression refrigeration system but not absorption refrigeration system?
cause its a gas
What is theFunction of accumulator in hydraulics system?
The function of accumulator in hydraulic system is to receive and store excess oil pumped through the system, which is used to compensate sudden increase in loads.
Where the refrigeration changes in a refrigeration system?
at the metering device before the evaporator
What does the evaporator do in the refrigeration system?
An evaporator in a refrigeration system works by passing warm air over it's coils.
What does an accumulator in a brake system do?
The accumulator stores brake fluid under very high pressure. An electric pump keeps the accumulator pressurized with brake fluid. When you press the brake pedal, pressurized fluid from the accumulator operates the brakes.
Is a accumulator part of the low side of a refrigerant system?
The accumulator is a component on the low pressure (vacuum) side of an air conditioning system which uses a fixed orifice tube - they won't be found on a Thermal Expansion Valve system.
What is a brake accumulator?
A brake accumulator is a device that holds brake fluid at a very high pressure. It is an important part of a proper brake system.
What determines the pressure on the low pressure side of a refrigeration system?
the boiling point of refrigerant in a refrigeration or air conditioning system determines the pressure of the low side of the system
How do you remove an accumulator?
Have an ASE certified technician in an EPA certified service shop do it. This task involves recovery and storage of the refrigerant in the system - purging the system in a manner which releases it into the atmosphere is illegal under federal law. Then the accumulator can be removed. If you remove the accumulator, you'll need to replace it.
Where is the Expansion device on a refrigeration system?
on the bottom
Name two problems a refrigeration system may have?
Two problems that a refrigeration system could have are compressor problems or a lack of or loss of refrigerant gas.
