answersLogoWhite

0


Best Answer

Kirchoffs Current Law : [KCL]

This law is also called Kirchhoff's point rule, Kirchhoff's junction rule (or nodal rule), and Kirchhoff's first rule. The principle of conservation of electric charge implies that: : At any point in an electrical circuit that does not represent a capacitor plate, the sum of currents flowing towards that point is equal to the sum of currents flowing away from that point. Kirchoffs Voltage Law : [KVL]

This law is also called Kirchhoff's second law, Kirchhoff's loop (or mesh) rule, and Kirchhoff's second rule. : The directed sum of the electrical potential differences around any closed circuit must be zero.

Kirchoffs Laws are widely used in the Electrical and Electronic engineering fields.

Hope this helps =)

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

8y ago

kirchhoff's voltage law:- it states that sum of all emfs and voltage drops is equal to zero kirchhoff's current law:- at a node,incoming currents is equal to outgoing currents

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Prime content of this page is about Kirchhoff Current Law and Kirchhoff Voltage Application.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: State Kirchoffs voltage and current law?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

If the current is 10 amperes in the main wire and 4 amperes in one of the branches how much current is in the other branch?

Six, Voltage is the same in a parallel circuit but current divides to total the sum of each branch. See Kirchoffs current law.


How much current flows through a 12 ohm flashlight bulb operating at 3.0 volts?

Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.


Can kirchoff's voltage law be used to determine voltage drop?

Yes. Kirchoff's Voltage Law states that the signed sum of the voltage drops going around a series circuit is zero. Thus, if you know all but one, you can figure it out. You simply add what you know up, and what is left is the last drop. Don't forget to be consistent in your use of signs. If, for instance, you show a voltage or current source as a voltage rise, then it must be considered to be a negative voltage drop. Or vice versa, as the case may be.


What happen to the current when the voltage increased if the resistance are constant?

If voltage increases when current remains constant then resistance must also increase. Ohm's Law: Voltage = Current times Resistance.


Does Kirchhoff current law and Kirchhoff voltage law depend on the relationship between current and voltage in a resistor?

Kirchhoff's Voltage and Current Laws apply to circuits: series, parallel, series-parallel, and complex.If your circuit comprises just a single resistor, then they still apply. For example, the voltage drop across a single resistor will be equal and opposite the applied voltage (Kirchhoff's Voltage Law), and the current entering the resistor will be equal to the current leaving it (Kirchhoff's Current Law).

Related questions

What is kirchoff voltage law and kirchoff current law?

kirchoffs voltage law : the algebric sum of all voltage drop is equal to algebric sum of voltage risekirchoffs current law : algebric sum of all current entering at a node is equal to algebric sum of current leavingCommentIt's Kirchhoff, not 'Kirchoff'!


If the current is 10 amperes in the main wire and 4 amperes in one of the branches how much current is in the other branch?

Six, Voltage is the same in a parallel circuit but current divides to total the sum of each branch. See Kirchoffs current law.


What is the application of kirchoffs voltage law?

Kirchoff's Voltage Law: The sum of the voltage drops across all elements in a series circuit add up to zero. If you know the voltage drops across all but one element, and you know the voltage rise across the source, then you can easily calculate the remaining drop.


State the law formulated by george Simon ohm relate current to voltage and resistance?

current flow is proportional to the voltage and inversly proportional to the resistance


Does ohms law state that current equals flow of electrons through a conductor?

No. Ohm's law relates voltage, current and resistance: V=IR. ("I" is the symbol for current.)


State two rules for the voltage and current in a series circuit?

Kirchoff's voltage law and Kirchoff's current law


How much current flows through a 12 ohm flashlight bulb operating at 3.0 volts?

Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.Ohm's Law: Voltage = current x resistance; solving for voltage, current = voltage / resistance.


What are the mathamatical relationships in Ohm's Law in AC circuits?

Ohm's Law Voltage = Current x Resistance Current = Voltage divided by Resistance Resistance = Voltage divided by Current


How do you compute for voltage if current and resistance is given?

Voltage = Current * Resistance (Ohm's law)


How the current in a circuit changes if the voltage in the circuit is decreased and the resistance remains the same?

If the ratio of voltage to current is constant, then the circuit is obeying Ohm's Law. If the ratio changes for variations in voltage, then the circuit does not obey Ohm's Law.


Can kirchoff's voltage law be used to determine voltage drop?

Yes. Kirchoff's Voltage Law states that the signed sum of the voltage drops going around a series circuit is zero. Thus, if you know all but one, you can figure it out. You simply add what you know up, and what is left is the last drop. Don't forget to be consistent in your use of signs. If, for instance, you show a voltage or current source as a voltage rise, then it must be considered to be a negative voltage drop. Or vice versa, as the case may be.


How is the resistance of a resister calculated?

ohms law calculation for a series circuit - Total Resistance = Total Voltage divided by Total Current