.02 both intake and exhaust.
Found on another web site that the clearance is; Intake- 0.006 in., exhaust- 0.006 in. Settings are taken cold.
.005 cold
Also,do you adjust them warm or cold?
Straight out of the original 1978 Manual: Intake Valve Clearance - Cold: 0.18mm or 0.007" Intake Valve Clearance - Hot: 0.20mm or 0.008" Exhaust Valve Clearance - Cold: 0.30mm or 0.012" Exhaust Valve Clearance - Hot: 0.33mm or 0.013" The manual states these specs are not the same for the 2T-G motor, only the 2T-C
.07mm or .003 inches cold.
.15mm or .006 inches cold.
.006" intake, .009" exhaust. Adjusted with engine cold.
cold intake is 0.003 in or .07 mm cold exhaust is 0.003 in or .07 mm
Intake is .002-.004 inches and exhaust is .006-.008 inches when cold.
Valve clearance (cold) Intake 0.005 to 0.007 in Exhaust 0.010 to 0.012 in
Cold settings are Inlet 0.12-0.18 mm Exhaust 0.15-0.18 mm
From the HAYNES REPAIR MANUAL: Valve Clearance (engine COLD) - Intake: 0.003 to 0.005 inch. Exhaust: 0.006 to 0.008 inch.