A BMW 530i is jump started by connecting the cables to the positive leads on both vehicles. The negative leads are connected to strong grounds like the alternator bracket.
A 2005 Chevrolet Equinox can be jump started by connecting the jumper cables to the positive leads on both vehicles. The negative leads are then attached to a strong ground on each vehicle like the alternator bracket.
The very basics should include an amp, 2 speakers, Mixer, 2 record/cd decks or a laptop if you are going the digital route, headphones and a microphone. Not forgetting all connecting leads and power leads.
sorry the answer is not connecting!! sorry the answer is not connecting!! sorry the answer is not connecting!! sorry the answer is not connecting!! sorry the answer is not connecting!!
"Connecting People" is the tagline of Nokia.
For easy and quick identification of the leads, so that the user does not make mistake while connecting the leads.AnswerFor residential wiring, the earth wire rarely has a cross-sectional area that is larger than the line (not 'phase') or neutral conductors.
A BMC 7 series is jump started by connecting the positive lead to the donor vehicle and the BMW. The negative leads are then connected to bare metal and the vehicle started.
Strictly NO, but in effect YES. Connecting to wifi means connecting to a wireless router - IF the router is connected to the Internet (it does not have to be), then connecting to it will also give you a an Internet connection.
Connecting different networks requires a router
Mood lighting in the car can be done by connecting LED lights to the rest of the battery circuit. Disconnect the negative cable and connect the LED light connector to the circuit that leads to the rear lights.
Connecting Phase A, B and C to the motor leads will make a 3 phase motor run in one direction while interchanging any two will make the motor rotate in the opposite direction.
connecting India