The efficiency of a motor is the output power divided by the input power. The difference is the lost power which appears as heat usually. High-efficiency motors produce very little lost power. But they tend to be more massive and expensive to make, so that most motor designs have to compromise on efficiency.
A round figure might be 85-90%. But smaller motors are designed for lower efficiency to reduce the cost of the motor, and high-powered motors are designed to be highly efficient, despite the increased cost, to avoid wasting a significant amount of energy.
None: "high tension" is just another way of saying "high voltage".
The Class B amplifier is a push pull amplifier with 78.5% efficiency. The high efficiency is due to the absence of power consumption during idle time which simultaneously increases the efficiency.
the high efficiency is obtained by using a larger condenser surface or by using more mordern alloys with more extended surface or fins
The type of motor used depends on the size of the lathe.Small "hobby" lathes use small fractional (1/8, 1/4...) horsepower ac motors which run on household single-phase power.The lathes which are used to produce crankshafts for huge marine diesel engines - or the rotor shafts of the massive alternators used to generate megawatts of electrical power - must use giant-sized motors, producing hundreds of horsepower.DC SHUNT MOTORS.Three-phase electric motor.
EFF1 is a high efficiency motor. EFF2 is a standard efficiency motor.
what is the difinition for high efficiency bulbs?
A round figure might be 85-90%. But smaller motors are designed for lower efficiency to reduce the cost of the motor, and high-powered motors are designed to be highly efficient, despite the increased cost, to avoid wasting a significant amount of energy.
Not always. I have seen induction motors for various applications having efficiency upto 95%.
A high efficiency machine will produce more of what is it that you want with the same power as the low efficiency one. In other words, for a low efficiency machine do as much as a high efficiency one, you have to give it more power (energy).
A high efficiency machine will produce more of what is it that you want with the same power as the low efficiency one. In other words, for a low efficiency machine do as much as a high efficiency one, you have to give it more power (energy).
High structural efficiency is a sign of a strong, relatively light design.
Elevator driving motors used with a generator field control are rated in kVA. This is a unit of electrical power that is often used to measure the capacity of elevator motors. ESCON Elevators uses generator field control motors in their elevator systems, which are known for their high efficiency and reliability. If you are looking for an elevator system that is both efficient and reliable, then ESCON Elevators is a great option
The efficiency rating is called annual fuel utilization efficiency or afue. For residential systems in the USA, the minimum is 80%. There is no standard for what is considered "high efficiency". The range of efficiencies goes up to about 96% for gas furnaces.
High-efficiency machines do more for less and are therefore more desirable than a low-efficiency machine.AnswerHigher efficiency means lower energy losses and, therefore, such machines are more economical than low-efficiency machines.
No, it will over sud and create a mess in the washer! Don't do it!
No...... Not always........... They can be modified to high efficiency..............