A zener diode is like a regular diode when connected in forward bias which means it will control the flow of the electricity throughout the circuit. Usually you'd find a zener diode in a reverse bias mode because of its purpose which is it has a breakdown voltage value of 5.6v; this shows that the circuit output voltage will be regulated at the same value of 5.6v. It also has the ability to change its own internal resistance based current flow passing through it helping sustain a fixed voltage of 5.6v. The benefits of a zener diode are that it is a less cost effective voltage regulator, its simplicity is based on the fact it's a diode with two overall purposes. The main purpose of a zener diode is to maintain a fixed voltage; in order for this to happen it must lower or raise its resistance depending on the actual current flowing throughout the circuit. If the current increases the zener diode will raise the resistance in order to maintain the fixed voltage. If the resistance lowers the diode will raise it because the fixed voltage should be at 5.6v, and works in reversed biased.
Applications of Zener diode:
a.)It Regulators.
b.)It Controlled Comparators.
c.)It Limiters.
d.)It is Part in Power Supplies.
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
Applications of Zener diode: a.)It Regulators. b.)It Controlled Comparators. c.)It Limiters. d.)It is Part in Power Supplies.
Zener diode is heavily doped pn junction diode.
zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage
Different applications of diode include:Rectification of voltageswitching circuitsclamping applicationsvoltage reference (zener Diode)phase lock loop/FFLinfrared applicationssignal amplifierssensorshigh frequency micro-wave oscillators.
A zener diode cannot be used as switch.
Dr. Clarence Melvin Zener of Southern Illinois University invented the zener diode.
zener diode is a revers bias diode which used for voltage regulation.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
The difference between the pn-junction diode and the zener diode is that the pn-junction diode is used for rectification while the zener diode is used for rectification and stabilization. Also, the zener diode can function in the breakdown region while the pn-juntion diode can not function in that regime.
Since they are in parallel, the 3.3V zener diode will "kick in" first when you reach 3.3V, and the circuit will pretty much act the same as if the 7V zener diode isn't there at all.