Want this question answered?
raid 1 because RAID 1 device maintains a mirror of all the data in a partition on another partition of the disk on the array and NTFS support partitioning of disks
That would be RAID 1.
The police planned a dawn raid on the house.He was caught trying to raid the fridge.We lost some jewellery in the home raid.
It depends on how the partition is installed. Some are bolted in, some are riveted in. Either way any fasteners need removed.It depends on how the partition is installed. Some are bolted in, some are riveted in. Either way any fasteners need removed.
What it contains varies, some hardware, it merely contains various files each with a set of instructions, other pieces of hardware e.g. laptops; the partition contains folders with copies of the drivers and pre-installed programs. Some computers have a third partition called the back_up partition to do this, just leaving the factory instructions in the recovery partition.
If you have connected more than two hard drives (non-RAID), W7 created a special partition for the system stability. You can trick the system, and disconnect all hard drives except the system one. After you are done installing the system, you can connect the other drives again and not having the 200 mb partition.
What it contains varies, some hardware, it merely contains various files each with a set of instructions, other pieces of hardware e.g. laptops; the partition contains folders with copies of the drivers and pre-installed programs. Some computers have a third partition called the back_up partition to do this, just leaving the factory instructions in the recovery partition.
What it contains varies, some hardware, it merely contains various files each with a set of instructions, other pieces of hardware e.g. laptops; the partition contains folders with copies of the drivers and pre-installed programs. Some computers have a third partition called the back_up partition to do this, just leaving the factory instructions in the recovery partition.
Most operating systems uses the boot partition to boot the computer. In some operating systems, both the system partition and the boot partition are used to boot up the system.
RAID-5 to create a 50MB Raid-5 partition across the three disks enter command diskpart create volume raid size=50 disk 1,2,3 Source Windows Server 2008 Network Infrastructure Configuration Lesson 2 page 30
The system partition(a partition where the operating system is installed) is the active partition of the Hard Drive
RAID upgrade a disk if the system or boot partition is part of spanned, striped, mirrored, or RAID-5 volume. http://technet.microsoft.com/en-us/library/bb726994.aspx