jelly jelly I am ed chubby im purple dani is a loser
you could get shocked
most of the resistors commonly used are carbon resistors
Sure some resistors are wire wound chrome wire and as such will display an inductance characteristics
They use a color code. Colored bands on the resistor that tell the value. Some precision resistors have their value written on them.
There are resistors on the back of the PCB that come loose. New resistors and some solder should fix the problem. what is the PCB and its location.
The total resistance of resistors in series is simply the sum of the resistance values of those resistors. If the resistors are identical, then you can multiply the resistance of one of them by the number of resistors in the circuit.
Film resistors have lower noise than carbon resistors.
Resistors are wired in series when they are connected in a line. The current flows through the resistors one after the other.
Both resistors will have the voltage of the battery.
It sounds like the resistors have broken loose and fallen off the back or the instrument cluster. Remove the cluster and open the back. flick the resistors some may fall off.. replace missing resistors.
Carbon composition resistors are resistors that are made with carbon or graphite mixed with a binding material. It's one type of resistors among several. There are also carbon-film resistors and metal-film resistors. Out of all the resistors, carbon-film resistors have the greatest tolerances and changes to temperature fluctations. Thus, they are used in applications where precision isn't critical and where temperature will not change drastically.
Linear resistors