Want this question answered?
Category 6
Type 1A STP or Cat 5 UTP.
The main purpose is to reduce cross-talk between the cable pairs. It also has the happy side effect of keeping the cable pairs neatly together while making connections..
{| ! Category ! Maximum data rate ! Usual application | CAT 1 (de facto name, never a standard)Up to 1 Mbps (1 MHz) analog voice (POTS)Basic Rate Interface in ISDNDoorbell wiring CAT 2 (de facto name, never a standard) 4 Mbps Mainly used in the IBM cabling system for Token Ring networks CAT 3 16 Mbps Voice (analog most popular implementation)10BASE-T Ethernet. CAT 4 20 Mbps Used in 16 Mbps Token Ring.Otherwise not used much. Was only a standard briefly and never widely installed.CAT 5 100 MHz 100 Mbps TPDDI155 Mbps ATM.No longer supported; replaced by 5E.10/100BASE-T4/16MBps Token RingAnalog Voice CAT 5E 100 MHz 100 Mbps TPDDI155 Mbps ATMGigabit Ethernet.Offers better near-end crosstalk than CAT 5 CAT 6 Up to 250 MHz Minimum cabling for data centers in TIA-942.Quickly replacing category 5e.CAT 6E Up to 500 MHz(field-tested to 500 MHz) Support for 10 Gigabit Ethernet (10GBASE-T.) May be either shielded (STP, ScTP, S/FTP) or unshielded (UTP). This standard published in Feb. 2008.Minimum for Data Centers in ISO data center standard. CAT 7(ISO Class F) 600 MHz1.2 GHz in pairs with Siemon connector Full-motion videoTeleradiologyGovernment and manufacturing environmentsFully Shielded (S/FTP) system using non-RJ45 connectors but backwards compatible with hybrid cords.Until February 2008, the only standard (published in 2002) to support 10GBASE-T for a full 100m. or go to http://searchdatacenter.techtarget.com/sDefinition/0,,sid80_gci211752,00.html |}
Why is balance an issue in UTP cables?Type your answer here...
what is use cross overcable
UTP cables are available to purchase from a wide variety of retailers and stores. Wal-Mart and Target both carry UTP cables. Additionally, Best Buy, Frys, and Radio Shack also carry these cables. An individual may also find UTP cables at places like Amazon and eBay.
Characteristic impedance of cat 5e utp cables is 100 ohms.
A UTP coupler is a small block to which you can connect two UTP cables to form a longer one. Handy if you have 2 short cables but need a long one.
UTP stands for Unshielded Twisted Pair. This is a type of cable which has the shielding above the twisted cables for EMI/EMC protection.
Coaxial cables are shielded; thus preventing them from other interference. UTP cable means Unshielded Twisted Pair - thus it has no protection against incoming interference.
cat5, cat6, utp, stp cables etc.
there are 3 types of cables are there 1 Twisted wire a) UTP ( Unshielded Twisted Pair b) STP ( Shielded Twisted Pair 2 Co-axial cable 3 FOC ( Fiber Optical cable )
There are several different cables that you can use for this process. They include a cross over cable or an uplink.
A switch, UTP straight through cables,Lan Card
UTP stands for 'unshielded twisted pair'. These cables are usually found in Ethernet networks and telephone lines. They are also sometimes found as part of a security network.