fast
Robert Austin Ingalls has written: 'Logical design of a microprogrammed special-purpose computer' -- subject(s): Electronics
There are various advantages of doing a design before setting out to make something. If you do a good design you will be sure it works.
List the advantages of design diagrams. List the traditional design tools.
A hardwired control unit has a processor that generates signals or instructions to be implemented in correct sequence. This was the older method of control that works through the use of distinct components, drums, a sequential circuit design, or flip chips. It is implemented using logic gates & flip flops. It is faster, less flexible & limited in complexity A micro programmed control unit on the other hand makes use of a micro sequencer from which instruction bits are decoded to be implemented. It acts as the device supervisor that controls the rest of the subsystems including arithmetic and logic units, registers, instruction registers, off-chip input/output, and buses. It is slower, more flexible & greater complexity
Timing pulses are used in sequencing the micro-operations in an instruction. For example, when LDA instruction is executed, the memory is read operation is performed in timing pulse T1 and memory writer operation is performed in timing pulse T2. Now the combination of the signal LDA and T1 can be used as a control signal for performing read operation. Similarly, the combination of the signal LDA and T2 can be used as a control signal for performing write operation.A master clock generator is used for controlling the timing for all register in a computer system. A state of a register cannot be changed by a clock pulse until it is enabled by the control signal, which are generated in the control unit and provide control inputs for multiplexers, processor register, and micro-operations. The control organization is of two types; hardwired control and micro-programmed control.Hardwired ControlIn a hardwired control, the control signals are generated by using the collection of combinational circuits. The main advantage of the hardwired control is that, it can be optimized to produce a fast mode of operation. Whenever a change or modification is to be done in the design, then the wiring among the various components needs to be done. Micro-Programmed ControlIn a micro-programmed control, a control memory is used for storing control information which is also programmed for initiating the sequence of micro-operations. Whenever any change or modification is required in the design, it can be done by updating the micro-program in the control memory.
pure -absolute control Quasi -have some control
A modern house has several advantages. A few of the advantages are spaciousness, pleasing design, room for customization, and earth friendly.
the practical applications of maximum power transfer theorem are 1:communication systems 2:control systems * radio transmitter design
Strength is that there is evidence of design, weakness is that there is no proof there there is a designer of the world and that he is God.
=== === Your design can be copied and pasted. You can't lose your work. CAD drawings can be Emailed.
Simplicity of design and manufacturing.
Answering "What are the advantages and disadvantages of OSI model?"