The advantages of having a 12V Water Pump are many. First, it is inexpensive. Second, it is easy to install. Third, there are no pressurized water lines.
12v pumps are water pumps. It is a 12 volt pump that can be used in campers, Jacuzzis, aquariums, fountains, water heaters, electronic refrigerators, and other items.
Please see "related questions" link at lower left.
12V
You need to check for 12v at washer pump connection when washer turned on. If 12v present at harness connector but pump not working, replace pump. If pump is working, but no fluid coming out at wipers, you will need to remove front hose and blow out any debris clogging hose.
i would not recommend it. that will have your fuel pump at a constant run when the ignition is switched on.
12v nominal. There must be at least 10v at the connection or it will not function properly.
Check forn 12VDC at the fuel stop solenoid located on the injection pump, no 12V no engine fuel.
You know it's bad when you apply 12v power to it but it doesn't run.
This is a pain, You have to bleed the air out of the system. There are two bleeders. one on the thermostat housing and one on the tube coming out of the water pump. Bring the car to operating temp, shut off, and open the therm. bleeder until you see coolant(be careful). Do the same with the the other until all air is out. I actually use a small 12v pump to circulate the coolant(cold of course) through the intake. Take the rubber hose off the tube at the water pump connect the pump inline and pump unitl you have no air bubbles.
use a 12v test light! to check all fuses and check power and ground at the pump..your pool pump repair guy in longwood fl.
need picture of 91 chevy cavalier rs. 12v 20/30 A 0 332 204171 bosch. what is it?
ON MY 1997 GTP THE PUMP WENT OUT. Its on the side of the washer fill tank,real easy to change. check to see if you have power to the pump with a 12v tester or multi-meter.