One primary advantage of UTP over STP or Fiber is cost. Twisted pair is also more simple to use in many applications (telephone, serial data, etc.) than fiber.
there are 3 types of cables are there 1 Twisted wire a) UTP ( Unshielded Twisted Pair b) STP ( Shielded Twisted Pair 2 Co-axial cable 3 FOC ( Fiber Optical cable )
In a Token Ring network, when using Shielded Twisted Pair (STP) cable, the maximum distance a computer can be from the Multi-Station Access Unit (MSAU) is 100 meters. This is an improvement over Unshielded Twisted Pair (UTP) cable, which is limited to 45 meters. The increased distance capability of STP is due to its shielding, which reduces electromagnetic interference.
1) Twisted pair cable is less expensive2) Twisted pair cable is required for modern transmission standards****************It is a thin, flexible cable that is easy to string between walls.Because UTP is small, it does not quickly fill up wiring ducts.UTP costs less per foot than any other type of LAN cable
UTP or unshielded twisted pair cabling is used in local area networks. Two causes of signal degradation are losing light over long distances and low quality cable shielding.
It is needed because you need to reverse the signals of a transmit line to a receive signal line. This is what network connectivity devices do, such as hubs, switches, etc. If you aren't using a connection device then the cable has to do that job.
There are many advantages of using cable clips. One of the many advantages of using cable clips is you can hook up cable from extended cords easier and quicker than normal.
Its cheap for a start. Pretty much every computer and laptop has a port for it, so no need to worry about having buy additional hardware. And its fairly reliable.
The twisting in the cable helps. Also, you must keep the cables far from sources of noise, such as heavy machinery. If this is not possible, another option, such as STP (shielded twisted pair) must be used.The twisting in the cable helps. Also, you must keep the cables far from sources of noise, such as heavy machinery. If this is not possible, another option, such as STP (shielded twisted pair) must be used.The twisting in the cable helps. Also, you must keep the cables far from sources of noise, such as heavy machinery. If this is not possible, another option, such as STP (shielded twisted pair) must be used.The twisting in the cable helps. Also, you must keep the cables far from sources of noise, such as heavy machinery. If this is not possible, another option, such as STP (shielded twisted pair) must be used.
UTP-Unshielded Twisted Pair. Normally UTP contains 8 wires or 4 pair. 100 meter maximum length. 4-100 Mbps speed.STP-Shielded twisted pair. 100 meter maximum length. 16-155 Mbps speed. Lower electrical interference than UTP
Cable internet gives you faster speeds than dial up .
The disadvantage is that attenuation increases with frequency above 100 kHz in these cables.
These cables are used in telephone lines to provide voice and data channels.