1) Twisted pair cable is less expensive
2) Twisted pair cable is required for modern transmission standards
****************
Twisted pair cable is less expensive.
Twisted pair cable is required for modern transmission standards.
That question is very vague. It could refer to varieties of power, telephone and computer network cabling. If you are referring to computer networking this is usually called UTP (unshielded twisted pair) cabling.
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
The hardware that makes up the enterprise-wide cabling system is known as the network infrastructure. This includes a variety of components such as routers, switches, hubs, and repeaters, which are used to interconnect different devices and create a reliable and efficient network. In addition to the hardware, the enterprise-wide cabling system also includes the physical cabling itself, which may be fiber optic or copper-based. The design and implementation of the network infrastructure is critical to ensuring that data can be transmitted and received effectively across the enterprise, and can have a significant impact on the performance and reliability of the overall system.
coaxial cable has a solid copper or copper-clad-steel centre conductor surrounded by a non-conductive dielectric insulating material. The dielectric is surrounded by foil shield/s and/or copper braid/s which form the outer conductor and also shield against electromagnetic interference (EMI). The outer conductor/shield is encased in a PVC jacket.
SONET (Synchronous Optical Network) is a physical layer network technology designed to carry large volumes of traffic over relatively long distances on fiber optic cabling.
Bus
Both the coaxial cable and twisted pair cable have a basic connection medium for network cabling. <<>> Coaxial cable can be used for transmission of RF (radio frequencies) whereas Cat 5 (twisted pairs cable) can not.
drawback sux advantage money
Fiber optic cablingAnswer Explanation: Unlike coaxial cabling, unshielded twisted pair (UTP) cabling, and shielded twisted pair (STP) cabling, fiber optic cabling is not susceptible to eavesdropping. An eavesdropper would have to actually cut the line and tap into the fiber optic cable with a highly complex form of optical T-connector. This would interrupt the connection, which should immediately trigger an alarm.The "Unshielded twisted pair cabling" and "Shielded twisted pair cabling" options are incorrect. Twisted pair cabling is susceptible to eavesdropping because information is transmitted through the cable via electrical pulses, which emit small amounts of electromagnetic radiation. An eavesdropper could intercept communications with the proper equipment.The "Coaxial cabling" option is incorrect. Coaxial cabling is susceptible to eavesdropping because anyone can tap into it and add an unauthorized device. Since connections to the network cannot be controlled by a switch or hub, there is no way to prevent unauthorized connections. An intruder can tap into the network with either a basic T-connector or vampire tap.
# reduce cabling cost # rolls out the art of seamless technology # allows mobility of users
did this in my college assignment, easy enough. Coaxial cabling: Coaxial cables have a copper rod in the middle that conducts electricity, there is a layer of plastic and metal, the plastic layer is placed between the copper rod and the metal to cancel out any interference (protective shield from the electrical frequencies) that may occur. The cabling can go further than the shielded twisting pair lengths, to support more network devices. Coaxial is also a very popular choice is school networks. There are two types of Coaxial cabling, thick and thin: thick provides extra protection to keep wet and moisture away from the centre rod but is hard to bend and install, has less protection than thick, but is easier to bend and about the same difficulty to install.
Category 5. This is used to specify a quality of network cabling. Category 5 is the lowest category that is usable for network cabling.
cabling
Dunno. "Quad" usually refers to the shielding (such as TV antenna coaxial cable), "CAT" usually refers to four-pair twisted pair. "CATn" (CAT3~CAT6) is four-pair, twisted-pair, unshielded cabling most commonly used in Ethernet computer network cabling. Refine the question, we can help out.
100 meters
Installation
RFC cabling stands for "Request for Comments" cabling. RFC is a series of documents published by the Internet Engineering Task Force (IETF) that define standards and protocols for the internet. In the context of cabling, RFC cabling refers to following the guidelines set out in these documents for the design and installation of network cabling systems.