0
ISDN (Integrated Services Digital Network) typically uses twisted pair cabling, specifically the Category 5 (Cat 5) or higher cables for its Basic Rate Interface (BRI) services. For Primary Rate Interface (PRI) connections, which carry more channels, coaxial cables or fiber optic cables may be used, depending on the distance and bandwidth requirements. Overall, twisted pair cabling is the most common for ISDN installations.
What else can I help you with?
What type of network medium is used by an integrated services digital network adapter?
An Integrated Services Digital Network (ISDN) adapter primarily uses twisted pair copper cabling as its network medium. This cabling connects to the ISDN line, which carries digital voice and data services over standard telephone lines. In some configurations, ISDN can also utilize fiber optic cables for higher bandwidth connections, especially in more advanced setups.
What type of cabling can be used for a small buieness computer network?
Cat5e or Cat6
What is NT Box?
It is an ISDN Network Termination device. ...or... It is a rack used to house network devices.
What is mean by cat5?
Category 5. This is used to specify a quality of network cabling. Category 5 is the lowest category that is usable for network cabling.
What is the difference between ISDN and SS7?
The Integrated Services Digital Network (ISDN) uses Digital Subscriber Signalling System No. 1 (DSS1) protocol interfaces to connect subscribers to the network. These are User-to-Network (UNI) interfaces. Signalling System No. 7 (SS7) is a suite of signalling protocols used in Network-to-Network (NNI) interfaces. These are connections between network elements within the ISDN.
What is Protocol Stack?
Integrated Services Digital Network (ISDN) is a digital, point-to-point network capable of transmitting speeds of about 2Mbps. A computer connects to an ISDN line via an ISDN adapter and uses the same type of wiring as a Telephone wire. The only difference is ISDN can carry analog (voice) and digital signals, so it can be used to connect to the internet. It can be connected by the phone company but it is rarely used as it needs special equipment and is more expensive than other way.
What is a sonet?
A SONET is a type of network technology layer that is physical. It is used for transporting a lot of traffic over fiber optic cabling.
What is UPT CAT5e Cable used for?
it is not UPT ,it is UTP which stands Unshielded Twisted Pair. The UTP is mainly used for network cabling i.e; LAN cabling.
What is conventional dial-up?
it is type of Internet connection in which a jack of telephone with twisted pair telephone cabling is used. it is used in making home network and also inexpensive. it is slow 56kpbs
What is the H-channel used for in the ISDN network?
carrying user voice and data circuit switching packet switching
What is the main function of straight over network cabling?
The main function of straight-through network cabling is to connect different types of devices on a network, such as computers to switches or routers. This type of cabling ensures that the transmission and receiving wires are aligned correctly, allowing for the proper communication protocol to be followed. Straight-through cables are typically used in Ethernet networks, adhering to standards like T568A or T568B for consistent wiring. This facilitates reliable data transfer and networking performance.
What is Integrated Services Digital Network?
An isdn stands for integrating services digital network ,it is a communication media througt which we can transmitte our voice,video and data, in isdn line two modem are used to for commnication one at source and other at the destination ,these modems are called isdn modem this is Qadar wafa from Kabul qadarwafa_4all@yahoo.com qadarwafa@multinet.af qadar-08@hotmail.com
