Want this question answered?
There is no 115 volt, 100 amp, or 400 amp switch on the dash of a 2008 Tacoma.
They probably have different settings for different songs.
345 Watts
1840
I ran it with that amp and it started clipping, so lower the settings on amp, the amp is a monster!!!
115 - 72 = 43 !
Probably because the tone settings on your amp or guitar are boosting that frequency range.
Residential power is usually 115 volts to 120 volts and will power a 15 amp air conditioner. If it is on a 15 amp breaker it may heat up the breaker and cause it to trip if it runs continuously in which case you would need to move it to a 20 amp circuit.A 20 amp circuit will handle 18 amps continuously without overheating the breaker and making it trip. A 15 amp circuit can handle 12 amps continuously without over heating the breaker.You cannot simply replace the 15 amp breaker with a 20 amp breaker because the 15 amp circuit uses smaller wire which might overheat.The term 110 is an old one. Most home power now is at least 115 volts.
My outlet is listed 100 watt and 400 watt You can rough guess 1 amp per 100 watts. The amp requirement will be listed on the tool.
The resistance of a lamp operating at 115 volts and using 0.25 amp of current is 460. The relationship I used is Ohm's law.
If you want to reset any settings on a electronic machine one way is to turn the machine off overnight
it really depends on what pedal you get not really as much of the settings on your amp man. i suggest a mesa pedal bro